Closure to Discussions of ‘Aerodynamic Effects of Shape, Camber, Pitch, and Ground Proximity on Idealized Ground-Vehicle Bodies’ (1981, ASME J. Fluids Eng., 103, pp. 637–638)

被引：0

作者：

George, A.R. ^{[1
]}

机构：

[1] Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca,NY,14853, United States

来源：

Journal of Fluids Engineering, Transactions of the ASME | 1981年 / 103卷 / 04期

关键词：

Compendex;

D O I：

10.1115/1.3241786

中图分类号：

学科分类号：

摘要：

引用

共 31 条

[11] Closure to Discussions of ‘Laminar Compressible Flow between Rotating Disks’ (1976, ASME J. Fluids Eng., 98, pp. 388–389)
Garrison, P.W.
Harvey, D.W.
Catton, I.
1600, American Society of Mechanical Engineers (ASME) (98):
[12] Closure to Discussions of ‘Measurements in Fully Developed Turbulent Channel Flow’ (1975, ASME J. Fluids Eng., 97, pp. 578–580)
Hussain, A.K.M.F.
Reynolds, W.C.
Journal of Fluids Engineering, Transactions of the ASME, 1975, 97 (04):
[13] Closure to Discussions of ‘The Flow Past a Surface-Mounted Obstacle’ (1984, ASME J. Fluids Eng., 106, pp. 111–112)
Bergeles, G.
Athanassiadis, N.
Journal of Fluids Engineering, Transactions of the ASME, 1984, 106 (01):
[14] Discussion: A Photographic Study of Cavitation in Jet Flow (Hoyt, J. W., and Taylor, J., 1981, ASME J. Fluids Eng., 103, pp. 14–18)
Shima, A.
Tsujino, T.
Journal of Fluids Engineering, Transactions of the ASME, 1981, 103 (02):
[15] Closure to Discussion of ‘Scale Effects on Various Types of Limited Cavitation’ (1981, ASME J. Fluids Eng., 103, p. 414)
Journal of Fluids Engineering, Transactions of the ASME, 1981, 103 (03):
[16] Closure to Discussions of ‘Discharge Coefficient for Venturi Flowmeter with Short Laying Length’ (1982, ASME J. Fluids Eng., 104, pp. 467–468)
Inoue, Masahiro
Journal of Fluids Engineering, Transactions of the ASME, 1982, 104 (04):
[17] Closure to Discussions of ‘Periodic Flow in a Wind Tunnel Produced by Rotating Shutters’ (1976, ASME J. Fluids Eng., 98, pp. 281–282)
Charnay, G.
Mathieu, J.
Journal of Fluids Engineering, Transactions of the ASME, 1976, 98 (02): : 282 - 283
[18] Closure to Discussions of ‘A Study of Shock Waves in Three-Dimensional Transonic Flow’ (1982, ASME J. Fluids Eng., 104, pp. 398–399)
Dawes, W.N.
Squire, L.C.
Journal of Fluids Engineering, Transactions of the ASME, 1982, 104 (03):
[19] Closure to Discussions of 'Prediction of Flow Separation in a Diffuser by a Boundary Layer Calculation' (1977, ASME J. Fluids Eng., 99, pp. 387-388)
Senoo, Y.
Nishi, M.
Journal of Fluids Engineering, Transactions of the ASME, 1977, 99 (02): : 388 - 389
[20] Closure to Discussions of ‘The Effect of Transverse Curvature on the Drag and Vortex Shedding of Elongated Bluff Bodies at Low Reynolds Number’ (1983, ASME J. Fluids Eng., 105, pp. 318–320)
Monson, D.R.
Journal of Fluids Engineering, Transactions of the ASME, 1983, 105 (03): : 320 - 322

← 1 2 3 4 →