Predicting the chip flow for nose radius tools under oblique machining conditions

被引：0

作者：

Young, Hong-Tsu ^{[1
]}

Liao, Yunn-Shiuan ^{[1
]}

Yang, Yi-Cherng ^{[1
]}

Mathew, Philip ^{[1
]}

机构：

[1] Natl Taiwan Univ, Taipei, Taiwan

来源：

Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an | 1993年 / 16卷 / 06期

关键词：

Cutting tools - Machine shop practice - Machining - Turning;

D O I：

10.1080/02533839.1993.9677557

中图分类号：

学科分类号：

摘要：

A model is presented which predicts the chip flow direction for nose radius tools with inclination angles. Experimental verification was made in turning that cut on the bars. A comparison of the predicted and experimental results shows excellent agreement, and the results are consistent with previous findings of other workers.

引用

页码：825 / 834

共 50 条

[41] ON　CONSUMPTION　OF　CUTTING　POWER　INFLUENCED　BY　CHIP　FLOW　UNDER　NON-FREE　CUTTING　CONDITIONS
Chinese Journal of Mechanical Engineering, 1997, (01) : 37 - 43
[42] Fisher-informed continual learning for remaining useful life prediction of machining tools under varying operating conditions
Kim, Gyeongho
Kang, Yun Seok
Yang, Sang Min
Choi, Jae Gyeong
Hwang, Gahyun
Park, Hyung Wook
Lim, Sunghoon
RELIABILITY ENGINEERING & SYSTEM SAFETY, 2025, 253
[43] Minimisation of non-machining times in operating automatic tool changers of machine tools under dynamic operating conditions
Baykasoglu, Adil
Ozsoydan, Fehmi Burcin
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 2018, 56 (04) : 1548 - 1564
[44] Effects of surface texture parameters of cutting tools on friction conditions at tool-chip interface during dry machining of AISI 1045 steel
Dhage, Sagar
Jayal, Anshu Dhar
Sarkar, Prabir
SUSTAINABLE MANUFACTURING FOR GLOBAL CIRCULAR ECONOMY, 2019, 33 : 794 - 801
[45] LES study of the influence of a train-nose shape on the flow structures under cross-wind conditions
Hemida, Hassan
Krajnovic, Sinisa
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2008, 130 (09): : 0911011 - 09110112
[46] On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 1: Chip Area Parameters under Variation of Side and Back Rake Angle
Bushlya, V.
Schultheiss, F.
Gutnichenko, O.
Zhou, J. M.
Stahl, J. -E.
15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO), 2015, 31 : 417 - 422
[47] Oblique fluid flow and heat transfer across a hollow fiber membrane bank under uniform temperature conditions
Ouyang, Yu-wen
Li, Zhen-Xing
Zhang, Li-Zhi
JOURNAL OF MEMBRANE SCIENCE, 2014, 470 : 524 - 534
[48] Machining of nickel-base, Inconel 718, alloy with ceramic tools under finishing conditions with various coolant supply pressures
Ezugwu, EO
Bonney, J
Fadare, DA
Sales, WF
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 162 : 609 - 614
[49] Experimental investigation of chip plastic side flow in machining of GH4169 superalloy under high-pressure cooling
Wu, Mingyang
Yu, Yongxin
Cheng, Yaonan
Li, Lubin
Zhao, Xu
FERROELECTRICS, 2018, 530 (01) : 82 - 96
[50] A CFD model for predicting the flow patterns of viscous fluids in a bioreactor under various operating conditions
Byung-Hwan Um
Thomas R. Hanley
Korean Journal of Chemical Engineering, 2008, 25 : 1094 - 1102

← 1 2 3 4 5 →