Development of ultra-clean plasma deposition process

被引:0
|
作者
Kamei, Toshihiro [1 ]
Matsuda, Akihisa [1 ]
机构
[1] Thin Film Silicon Solar Cells Superlab, Electroteclmical Laboratory, 1-1-4 Umezono Tsukuba 3058568, Japan
关键词
Amorphous silicon - Degassing - Degradation - Grain size and shape - Hydrogenation - Partial pressure - Photochemical reactions - Purification - Secondary ion mass spectrometry;
D O I
暂无
中图分类号
学科分类号
摘要
We have developed a new type of ultra-high vacuum plasma-enhanced chemical vapor deposition (UHV/PECVD) system. According to high sensitivity secondary ion mass spectrometry, device quality hydrogenated amorphous silicon (a-Si:H) films deposited at 250°C at a deposition rate of 1 angstrom/s contains 1015 cm-3 of O, 1015 cm-3 of C, and 1014 cm-3 of N impurities, while low defect hydrogenated microcrystalline silicon (μc-Si:H) films deposited at 200°C at a very low rate of 0.1 angstrom/s include 1016 cm-3 of O, 1015 cm-3 of C and 1016 cm-3 of N. These are the lowest concentrations of atmospheric contaminants for these kinds of materials observed so far. The essential features of the present UHV/PECVD system are an extremely low outgassing rate of 8 × 10-9 Torr·l/s, extremely low partial pressure of contaminant gas species -12 Torr, and purification of feed gas SiH4 at 'point of use'. These efforts are quite important not only for clarifying the microscopic mechanism of photo-induced degradation in a-Si:H, but also for enlarging the crystalline grain size in μc-Si:H. μc-Si:H with a grain size of ≈ 1000 angstrom as determined by Scherrer's formula can be obtained at the higher rate of 1.5 angstrom/s by utilizing a VHF (Very High Frequency) plasma. The specific origins of impurities in the films are also discussed.
引用
收藏
页码:19 / 24
相关论文
共 50 条
  • [1] Development of ultra-clean plasma deposition process
    Kamei, T
    Matsuda, A
    AMORPHOUS AND HETEROGENEOUS SILICON THIN FILMS: FUNDAMENTALS TO DEVICES-1999, 1999, 557 : 19 - 24
  • [2] Research and development of ultra-clean manufacturing
    Bai Q.
    Guo Y.
    Chen J.
    Lu L.
    Zhang Q.
    Zhang F.
    Zhao H.
    Yuan X.
    Liang Y.
    1600, Chinese Mechanical Engineering Society (52): : 145 - 153
  • [3] Particle transport and adhesion in an ultra-clean ion-beam sputter deposition process
    Walton, CC
    Rader, DJ
    Folta, JA
    Sweeney, DW
    PARTICLES ON SURFACES 8: DETECTION, ADHESION AND REMOVAL, 2003, : 63 - 76
  • [4] Ultra-clean coal
    不详
    TCE, 2006, (778): : 16 - 16
  • [5] ULTRA-CLEAN AIR
    LAURENCE, M
    JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME, 1983, 65 (04): : 375 - 377
  • [6] ULTRA-CLEAN AIR IN SURGERY
    SANDERSON, MC
    JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME, 1977, 59 (04): : 517 - 517
  • [7] Ultra-clean power plants
    不详
    AMERICAN CERAMIC SOCIETY BULLETIN, 2005, 84 (08): : 8 - 8
  • [8] ULTRA-CLEAN PROCESSING FOR ULSI
    OHMI, T
    MICROELECTRONICS JOURNAL, 1995, 26 (06) : 595 - 619
  • [9] PRODUCTION OF ULTRA-CLEAN STEEL BY THE NKK ARC PROCESS.
    Koyano, T.
    Shiratani, Y.
    Uchida, S.
    Nakashima, H.
    Usui, T.
    Ikeda, M.
    I & SM, 1986, 13 (07): : 26 - 33
  • [10] Understanding particle defect transport in an ultra-clean sputter coating process
    Walton, C
    Kearney, P
    Folta, J
    Sweeney, D
    Mirkarimi, P
    EMERGING LITHOGRAPHIC TECHNOLOGIES VII, PTS 1 AND 2, 2003, 5037 : 470 - 481