Tool steels for production of seamless steel pipe: Industrial trials and laboratory tests

被引：0
|
作者：
Cumino, G. [1 ]
Scaccia, A. [1 ]
机构：
[1] Dalmine SpA
来源：
Metallurgia Italiana | 1988年 / 80卷 / 7-8期
关键词：
Tool Steel - Wear;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Research was carried out to develop new steels with increased properties for mandrels in the production of seamless steel pipes. The results of tribological investigations showed similar behaviour of Cr-Mo-V steels at 600°C (Ni steel was worse); at 800°C the steel 2.5% Cr showed the best behaviour. Industrial trials showed the same results as laboratory tests: the steel with 2.5% Cr was the best, followed by AISI H13, AISI H11 and Ni steel.
引用
收藏
页码：575 / 581
相关论文
共 20 条
  • [11] Industrial Tests of Microcrystalline Complex Alkaline Earth Metal Alloys when Casting Pipe Steel
    Bakin I.V.
    Shapovalov A.N.
    Kuznetsov M.S.
    Shaburova N.A.
    Usmanov R.G.
    Golubtsov V.A.
    Ryabchikov I.V.
    Mizin V.G.
    Panov V.N.
    Steel in Translation, 2020, 50 (11) : 795 - 800
  • [12] PRODUCTION OF TUBE ROUNDS FOR SEAMLESS TUBES AND PIPE BY TWIN-MOLD CASTING AT WAKAYAMA STEEL WORKS.
    Mori, Akiyoshi
    Nagahata, Tsutomu
    Tomono, Hiroshi
    Tsujita, Susumu
    Sumitomo Search, 1986, (33): : 63 - 71
  • [13] Elevated Temperature Sliding Wear Behaviors of Piercing Plug Tool Steels Used for Production of Seamless Tube of Power Plant
    Choi, Byung-Young
    Gu, Yoon-Sik
    Zhu, Qiang
    Zhu, Hongtao
    Tieu, Kiet
    KOREAN JOURNAL OF METALS AND MATERIALS, 2015, 53 (12): : 851 - 858
  • [14] Effect of Compressed Gas on Deep Mine Long-Distance Backfill Pipe Flushing: From Laboratory to Industrial Tests
    Bai, Longjian
    Wang, Hongjiang
    Wu, Aixiang
    Li, Hao
    Wang, Shengkai
    Chen, Chong
    Liu, Chunkang
    ADVANCES IN CIVIL ENGINEERING, 2024, 2024
  • [15] Development of mathematical models for the design of annealing cycles of high-strength steels through laboratory tests and subsequent industrial validation
    Canto, S.
    Ferraiuolo, A.
    Natali, S.
    METALLURGIA ITALIANA, 2021, (04): : 22 - 30
  • [16] Thick-walled centrifugally cast 08X18H10T steel blank for seamless-pipe production
    Zaika V.N.
    Shlyamnev A.P.
    Filippov G.A.
    Zakharchenko K.V.
    Shevakin A.F.
    Steel in Translation, 2011, 41 (01) : 70 - 75
  • [17] Material transfer phenomena and failure mechanisms of a nanostructured Cr-Al-N coating in laboratory wear tests and an industrial punch tool application
    Wang, L.
    Nie, X.
    Housden, J.
    Spain, E.
    Jiang, J. C.
    Meletis, E. I.
    Leyland, A.
    Matthews, A.
    SURFACE & COATINGS TECHNOLOGY, 2008, 203 (5-7): : 816 - 821
  • [18] Development of high strength low alloy steels for marine applications part 2: simulation of marine exposure of steel by means of laboratory tests in flowing sea water
    Blekkenhorst, F.
    Ferrari, G.M.
    Van Der Wekken, C.J.
    Ijsseling, F.P.
    British Corrosion Journal, 1988, 23 (03): : 165 - 171
  • [19] Value Chain Comparison of Additively and Conventionally Manufactured Multi-Cavity Tool Steel Inserts: An Injection Molding Industrial Case Study for High-Volume Production
    Moshiri, Mandana
    Raza, Mohsin
    Sahlab, Mohamed
    Malik, Ali Ahmad
    Bilberg, Arne
    Tosello, Guido
    APPLIED SCIENCES-BASEL, 2022, 12 (20):
  • [20] INVESTIGATION OF CORROSION BEHAVIOR AND EXPERIENCE OF INDUSTRIAL-TESTS OF THE ECONOMICALLY ALLOYED BY NICKEL 08X22H6T STEEL IN ALKALI MEDIA OF THE CAUSTIC SODA PRODUCTION
    ORLOVA, FA
    SHIROKOVA, NV
    TURALINA, TS
    MOSOLOV, AV
    KHIMICHESKAYA PROMYSHLENNOST, 1983, (07): : 426 - 428
12