Preparation and mechanical properties of TiB2 composites containing Ni and C

被引:0
|
作者
Matsushita, Junichi [1 ]
Nagashima, Hideo [1 ]
Saito, Hajime [1 ]
机构
[1] Toshiba Ceramics Co. Ltd, Kariva, Japan
关键词
Borides - Densification - Composite Materials - Nonmetallic Matrix Composites - Titanium Compounds - Fracture - Titanium Compounds - Sintering - X-Ray Analysis;
D O I
暂无
中图分类号
学科分类号
摘要
Mechanical properties of pressureless sintered TiB2 containing Ni and C were investigated. Ni and C play an important role in the densification of TiB2. Sintered TiB2 containing 7.5wt% (14Ni:1.5C) exhibited a bending strength of 470MPa. Vickers hardness of 17GPa and K10 of 4.9MPam 1/2 . The fracture surface of TiB2 sintered containing Ni and C showed both transgranular and intergranular fracture modes. XRD analysis detected Ni3 B and TiC phases besides in addition to TiB2 in the sintered body.
引用
收藏
页码:77 / 81
相关论文
共 50 条
  • [42] Effect of TiB2 on the Phase Composition, Microstructure, and Tribological Properties of AlCoCrFeNi/TiB2 Composites
    J. G. Kang
    B. T. Yang
    J. C. Wei
    Powder Metallurgy and Metal Ceramics, 2021, 59 : 537 - 545
  • [43] EFFECT OF Ni ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TiB2/TiB TITANIUM MATRIX COMPOSITE COATINGS
    Lin Yinghua
    Lei Yongping
    Fu Hanguang
    Lin Jian
    ACTA METALLURGICA SINICA, 2014, 50 (12) : 1520 - 1528
  • [44] Mechanical properties of pressureless sintered boron carbide containing TiB2 phase
    Skorokhod, V
    Vlajic, MD
    Krstic, VD
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1996, 15 (15) : 1337 - 1339
  • [45] Effect of TiB2 Nanoparticle Content on the Microstructure and Mechanical Properties of TiB2/Mg-4Al-1.5Si Composites
    Liu, Jian
    Chen, Xiaogang
    Wang, Wuxiao
    Zhao, Yu
    He, Na
    MATERIALS, 2023, 16 (07)
  • [46] Research on the electronic properties of TiB2/γ-Fe(111) and TiB2/Ni (111) interfaces
    Shi, Yaochen
    Lu, Zhiyi
    Nie, Yufei
    Duan, Haitao
    Wang, Chaoqun
    Du, Yingyu
    Ding, Ning
    COMPUTATIONAL MATERIALS SCIENCE, 2024, 244
  • [47] Influence of milling mechanism on synthesis of TiB2 and TiB/TiB2 composites
    Wexler, D
    Fenwick, A
    Calka, A
    METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, 2003, : 199 - 204
  • [48] Effects of TiB2 Particles on the Microstructure Evolution and Mechanical Properties of B4C/TiB2 Ceramic Composite
    Niu, Haiyan
    Zhu, Yu
    You, Ning
    Wang, Yangwei
    Cheng, Huanwu
    Luo, Dujun
    Tang, Mengying
    Zhang, Jiamin
    MATERIALS, 2021, 14 (18)
  • [49] Structure, mechanical and tribological properties of d.c. magnetron sputtered TiB2 and TiB2(N) thin films
    Deng, H., 1600, Elsevier Science S.A., Lausanne, Switzerland (76-77):
  • [50] Effect of sintering parameters on mechanical properties and microstructures of B4C/TiB2 ceramic composites
    Sun, Junlong
    Liu, Changxia
    Li, Bin
    Wang, Liangshen
    Feng, Baofu
    Xie, Zaiyu
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2016, 107 (01) : 52 - 56