Improvement of sinterability of Al2O3-SiC ceramics

被引：0
|
作者：
Katsumura, Yuji
Kobayashi, Masaki
Kobori, Keiichi
Suzuki, Hisashi
机构：
来源：
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy | 1988年 / 35卷 / 06期
关键词：
Microscopic Examination--Scanning Electron Microscopy - X-Ray Analysis;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
An Al2O3-SiC mixed powder with additional SiO2 powder and pre-oxidized Al2O3-SiC mixed powder containing SiO2 were hot-pressed in Ar. The sinterability was examined in comparison with Al2O3-SiC mixed powder free from SiO2. The structures and transverse rupture strength were also examined. Sinterability improved with powder containing over 2-3% SiO2. This is due to mullite formation and the appearance of mullite-SiO2 eutectic liquid during the period of rising temperature. With increasing SiO2 contents, the microstructure became locally coagulated and T.R.S. decreased slightly. As the fracture source, an area probably due to the coagulated structure was observed.
引用
收藏
页码：532 / 537
相关论文
共 50 条
  • [41] Rheological properties of Al2O3-SiC whisker composite suspensions
    Bergstrom, L
    JOURNAL OF MATERIALS SCIENCE, 1996, 31 (19) : 5257 - 5270
  • [42] High temperature behaviour of Al2O3-SiC nano composites
    Verhelle, JP
    Poorteman, M
    Descamps, P
    Deletter, M
    Descamps, JC
    Cambier, F
    ENGINEERING CERAMICS: MULTIFUNCTIONAL PROPERTIES - NEW PERSPECTIVES, 2000, 175-1 : 301 - 310
  • [43] Optimization of mechanical properties of Al2O3-SiC nanocomposite body
    Asadi, A.
    Vanini, S. A. Sadough
    Farrokhi, A.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2011, 225 (L4) : 266 - 276
  • [44] High temperature behaviour of Al2O3-SiC nano composites
    Verhelle, J.P.
    Poorteman, M.
    Descamps, P.
    Deletter, M.
    Descamps, J.C.
    Cambier, F.
    Key Engineering Materials, 2000, 175 : 301 - 310
  • [45] Creep of an Al2O3-SiC(whisker)-TiC(particle) composite
    de Arellano-Lopez, A.R.
    Smirnov, B.I.
    Goretta, K.C.
    Routbort, J.L.
    Materials Science and Engineering A, 1998, A252 (01): : 93 - 97
  • [46] MACHINABILITY STUDY ON Al7075/Al2O3-SiC HYBRID COMPOSITES
    Mukundaiah, Ravikumar
    Reddappa, H. N.
    Suresh, R.
    Rammohan, Y. S.
    Babu, E. R.
    Nagaraja, C. R.
    METALLURGICAL & MATERIALS ENGINEERING, 2022, 28 (01) : 61 - 77
  • [47] Sliding abrasion wear assessment of Al2O3-sic nanocomposite coatings
    Dearnley, PA
    Panagopoulos, K
    Kern, E
    Weiss, H
    SURFACE ENGINEERING, 2003, 19 (05) : 373 - 378
  • [48] Microstructural design of Al2O3-SiC nanocomposites by Spark Plasma Sintering
    Alvarez, I.
    Torrecillas, R.
    Solis, W.
    Peretyagin, P.
    Fernandez, A.
    CERAMICS INTERNATIONAL, 2016, 42 (15) : 17248 - 17253
  • [49] Microstructure and creep behavior of Al2O3-SiC ceramic matrix composites
    Deng, Z.-Y.
    Shi, J.-L.
    Zhang, Y.-F.
    Guo, J.-K.
    Kobayashi, T.
    Key Engineering Materials, 159-160 : 399 - 404
  • [50] INDENTATION LOAD-SIZE EFFECT IN Al2O3-SIC NANOCOMPOSITES
    Csehova, Erika
    Andrejovska, Jana
    Limpichaipanit, Apichart
    Dusza, Jan
    Todd, Richard
    JOURNAL OF ELECTRICAL ENGINEERING-ELEKTROTECHNICKY CASOPIS, 2010, 61 (05): : 305 - 307
12345