Influence of ZrB2 content on properties of LaB6-ZrB2 composites

被引：0
|
作者：
Gao, Ruilan [1 ]
Yu, Huashun [1 ]
Han, Jiande [1 ]
Min, Guanghui [1 ]
Paderno, Y.B. [2 ]
机构：
[1] Ctr. on New Mat., Sch. of Mat. Sci. and Eng., Shandong Univ., Ji'nan 250061, China
[2] Inst. of Problems for Mat., Natl. Acad. of Sci. of Ukraine, Kiev 03142, Ukraine
来源：
Kuei Suan Jen Hsueh Pao/ Journal of the Chinese Ceramic Society | 2004年 / 32卷 / 04期
关键词：
Bending strength - Borides - Carbon - Crystal microstructure - Fracture toughness - Hardness - Hot pressing - Lanthanum compounds - Morphology - Polycrystalline materials - Reduction - Scanning electron microscopy - Sintering - Zirconium compounds;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
LaB6-ZrB2 composite powders with different contents of ZrB2 were synthesized by the carbon thermo-reduction method and the corresponding polycrystalline composites were fabricated by the hot pressing sintering method. The effects of the ZrB2 content on the microstructure and mechanical properties of the composites were studied. The results show that the hardness and the bending strength of LaB6-ZrB2 poly-crystals are enhanced with the increase of ZrB2 content, while the fracture toughness is increased firstly and decreased afterwards and it reaches the optimum value when the mass fraction of ZrB2 is 21%. The microstructure and the fracture morphology of the composites were revealed by means of metallographic and SEM. The improvement mechanism of the fracture toughness of the composites by adding ZrB2 was analyzed.
引用
收藏
页码：507 / 511
相关论文
共 50 条
  • [41] Oxidation of ZrB2 and its composites: a review
    Inoue, Ryo
    Arai, Yutaro
    Kubota, Yuki
    Kogo, Yasuo
    Goto, Ken
    JOURNAL OF MATERIALS SCIENCE, 2018, 53 (21) : 14885 - 14906
  • [42] Laser modified microstructures in ZrB2, ZrB2/SiC and ZrC
    Jayaseelan, D. D.
    Jackson, H.
    Eakins, E.
    Brown, P.
    Lee, W. E.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2010, 30 (11) : 2279 - 2288
  • [43] Oxidation of ZrB2 and its composites: a review
    Ryo Inoue
    Yutaro Arai
    Yuki Kubota
    Yasuo Kogo
    Ken Goto
    Journal of Materials Science, 2018, 53 : 14885 - 14906
  • [44] Thermodynamic modeling of parameters for quasibinary eutectic LaB6−ZrB2
    V. M. Danilenko
    Yu. B. Paderno
    V. L. Bekenev
    Powder Metallurgy and Metal Ceramics, 1999, 38 : 28 - 33
  • [45] Heat conduction mechanisms in hot pressed ZrB2 and ZrB2-SiC composites
    Patel, Manish
    Prasad, V. V. Bhanu
    Jayaram, Vikram
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2013, 33 (10) : 1615 - 1624
  • [46] In situ studies of oxidation of ZrB2 and ZrB2-SiC composites at high temperatures
    Sarin, P.
    Driemeyer, P. E.
    Haggerty, R. P.
    Kim, D. -K.
    Bell, J. L.
    Apostolov, Z. D.
    Kriven, W. M.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2010, 30 (11) : 2375 - 2386
  • [47] Electrical and thermophysical properties of ZrB2 and HfB2 based composites
    Mallik, Manab
    Kailath, Ansu J.
    Ray, K. K.
    Mitra, R.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (10) : 2545 - 2555
  • [48] EFFECT OF DISPERSION OF ZRB2 ON RESISTIVITY OF SIC-ZRB2 ELECTROCONDUCTIVE CERAMIC COMPOSITES
    JIMBOU, R
    SUZUKI, Y
    TAKAHASHI, K
    NIPPON SERAMIKKUSU KYOKAI GAKUJUTSU RONBUNSHI-JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1990, 98 (02): : 225 - 230
  • [49] The bending strength temperature dependence of the directionally solidified eutectic LaB6-ZrB2 composite
    Bogomol, I.
    Nishimura, T.
    Nesterenko, Yu.
    Vasylkiv, O.
    Sakka, Y.
    Loboda, P.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (20) : 6123 - 6129
  • [50] CONTENT OF ZRB2 IN THE NI-ZRB2 COMPOSITE LAYER ELECTRODEPOSITED BY DISPERSION PLATING
    ISE, B
    MEGURO, S
    DENKI KAGAKU, 1993, 61 (02): : 212 - 217
12345