STATISTICAL EVALUATION OF POST-YIELD FRACTURE MECHANICS PROPERTIES ON THE BASIS OF THE NOTCHED BAR IMPACT TEST.

被引：0

作者：

Kussmaul, K. ^{[1
]}

Roos, E. ^{[1
]}

机构：

[1] Univ of Stuttgart, Stuttgart, West Ger, Univ of Stuttgart, Stuttgart, West Ger

来源：

| 1600年 / 87期

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

STEEL TESTING

引用

共 27 条

[21] Mode II fracture mechanics properties of solid wood measured by the three-point eccentric end-notched flexure test
Yoshihara, Hiroshi
ENGINEERING FRACTURE MECHANICS, 2015, 141 : 140 - 151
[22] Mode II fracture mechanics properties of wood measured by the asymmetric four-point bending test using a single-edge-notched specimen
Yoshihara, Hiroshi
ENGINEERING FRACTURE MECHANICS, 2008, 75 (16) : 4727 - 4739
[23] TRANSFERABILITY OF POST YIELD FRACTURE-MECHANICS PROPERTIES FROM SMALL-SCALE SPECIMENS TO LARGE-SCALE SPECIMENS AND COMPONENTS
ROOS, E
NUCLEAR ENGINEERING AND DESIGN, 1983, 76 (03) : 339 - 346
[24] Discussion on the paper "Evaluation of dynamic fracture toughness KId by Hopkinson pressure bar loaded instrumented charpy impact test" by Jiang!Fengchun, Liu!Ruitang, Zhang!Xiaoxin, Kenneth S.!Vecchio and Aashish!Rohatgi, Engineering Fracture Mechanics, 71 (2004) pp.279-287
Rokach, IV
ENGINEERING FRACTURE MECHANICS, 2005, 72 (07) : 1107 - 1111
[25] Development of Small-Scale Impact Three-Point Bending Test Apparatus and Evaluation of Impact Fracture Properties of Mg-6%Al-1%Zn-2% Ca Alloy
Hase, Takayuki
Kawa, Tomoaki
Ikeo, Naoko
Mukai, Toshiji
MATERIALS TRANSACTIONS, 2016, 57 (11) : 1872 - 1879
[26] Discussion of: "Mode II fracture mechanics properties of wood measured by the asymmetric four-point bending test using a single-edge-notched specimen of Hiroshi Yoshihara Eng. Frac. Mech. 75 (2008) 4727-4739"
van der Put, T. A. C. M.
ENGINEERING FRACTURE MECHANICS, 2012, 90 : 172 - 179
[27] Comments on "Discussion of: "Mode II fracture mechanics properties of wood measured by the asymmetric four-point bending test using a single-edge-notched specimen of Hiroshi Yoshihara Engng. Fract. Mech. 75 (2008) 4727-4739" by van der Put [Engng. Fract. Mech. 90 (2012) 172-179]"
Yoshihara, Hiroshi
ENGINEERING FRACTURE MECHANICS, 2013, 112 : 181 - 188

← 1 2 3 →