INCREASING THE STABILITY OF THE PROCESS OF WELDING STRUCTURES OF ALUMINIUM AND MAGNESIUM ALLOYS USING AN IMMERSED ARC.

被引：0

作者：

Nesterov, A.F. ^{[1
]}

Bulgachev, E.A. ^{[1
]}

Boitsev, N.B. ^{[1
]}

机构：

[1] K. E. Tsiolkovskii Inst of Aviation, Technology, Moscow, USSR, K. E. Tsiolkovskii Inst of Aviation Technology, Moscow, USSR

来源：

Welding Production (English translation of Svarochnoe Proizvodstvo) | 1986年 / 33卷 / 10期

关键词：

WELDING; -; Electrodes;

D O I：

暂无

中图分类号：

TG4 [焊接、金属切割及金属粘接];

学科分类号：

080201 ; 080503 ;

摘要：

The results show that structures of aluminum and magnesium alloys up to 60mm thick can be welded efficiently by welding (without edge preparation) with an immersed arc using a non-consumable electrode. This procedure results in high quality welded joints with a small number of defects. It is shown that consumable electrode welding with an immersed arc is also highly efficient in welding components of comparatively small thickness (5. 0-10. 0mm). In this case it is not necesary to use filler wire (strength factor 0. 90-0. 95). The results show that the stability of the welding process and, consequently, the probability of producing high quality welded joints are determined by a limited range of the welding parameters.

引用

页码：11 / 12

共 50 条

[1] INCREASING THE STABILITY OF THE PROCESS OF WELDING STRUCTURES OF ALUMINUM AND MAGNESIUM ALLOYS USING AN IMMERSED ARC
NESTEROV, AF
BULGACHEV, EA
BOITSEV, NB
WELDING PRODUCTION, 1986, 33 (10): : 11 - 12
[2] Computational investigation of plasma arc welding process for aluminium alloys
Hossain, Ibrak
Bhowmik, Abhijit
Pattanaik, Ashutosh
Kumar, Rahul
Singh, Abhishek Kumar
Pandey, Shatrudhan
ENGINEERING RESEARCH EXPRESS, 2024, 6 (02):
[3] Process stability of automated gas metal Arc welding of aluminium
Schubert, E
ROBOTIC WELDING, INTELLIGENCE AND AUTOMATION, 2004, 299 : 1 - 13
[4] INCREASING THE STABILITY OF THE PROCESS OF COATED ELECTRODE ARC-WELDING USING MODULATED CURRENT
DEDYUKH, RI
WELDING PRODUCTION, 1985, 32 (01): : 29 - 30
[5] CALCULATION OF TEMPERATURE DISTRIBUTION IN REPAIR WELDING MAGNESIUM CASTINGS USING A THREE-PHASE ARC.
Stolbov, V.I.
El'tsov, V.V.
Potekhin, V.P.
Welding Production (English translation of Svarochnoe Proizvodstvo), 1985, 32 (09): : 43 - 47
[6] Evaporation phenomena of magnesium from droplet at welding wire tip in pulsed MIG arc welding of aluminium alloys
Wang, J. -B.
Nishimura, H.
Katayma, S.
Mizutani, M.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2011, 16 (05) : 418 - 425
[7] Evidence of short arc welding for magnesium alloys and solutions to stimulate the reproducibility of the process
Prove di saldatura ad arco in short are di leghe di magnesio e soluzioni per incentivare la riproducibilità del processo
2013, Instituto Italiano della Saldatura (65):
[8] A review on magnetically supported gas metal arc welding process for magnesium alloys
Sharma, Pankaj
Chattopadhyaya, Somnath
Singh, N. K.
MATERIALS RESEARCH EXPRESS, 2019, 6 (08)
[9] ARC SPOT WELDING OF ALUMINIUM-MAGNESIUM ALLOYS IN HELIUM WITH A NON-CONSUMABLE ELECTRODE
TIMOSHENKO, AN
LOZOVSKII, VP
NOVIKOV, VI
AUTOMATIC WELDING USSR, 1977, 30 (07): : 48 - 50
[10] The forging process for aluminium and magnesium alloys
Alalykin, AA
Boitsov, VV
Gutman, SE
METALL, 2002, 56 (10): : 630 - 633

← 1 2 3 4 5 →