STUDY OF AUSTENITIC STAINLESS STEEL WELDED WITH LOW ALLOY STEEL FILLER METAL.

被引：0
|
作者：
Burns, Forrest A.
Dyke Jr., Ray A.
机构：
来源：
NASA Technical Paper | 1979年 / 1460期
关键词：
WELDS - Mechanical Properties;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A weld development program was initiated to determine the tensile and impact strength test properties of 316L stainless steel plate welded with low alloy steel filler metal. Tests were conducted at room temperature and minus 100 degree F on standard test specimens machined from as-welded panels of various chemical compositions. No significant difference were found as the result of variations in percentage chemical composition on the impact and tensile test results. The weldments containing lower chromium and nickel as the result of dilution of parent metal from the use of the low alloy steel filler metal corroded more severely in a marine environment. The use of a protective finish, i. e. , a nitrile-based paint containing aluminum powder, prevented the corrosive attack.
引用
收藏
相关论文
共 50 条
  • [41] HE-BLISTERS ON WELDED AUSTENITIC STAINLESS-STEEL
    YAMANE, T
    HIRAMATSU, N
    HIRAO, K
    TANABE, T
    IMOTO, S
    ARATA, Y
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1985, 4 (11) : 1359 - 1360
  • [42] Microstructures in Friction Stir Welded 304 Austenitic Stainless Steel
    H. Kokawa
    S. H. C. Park
    Y. S. Sato
    K. Okamoto
    S. Hirano
    M. Inagaki
    Welding in the World, 2005, 49 (3-4) : 34 - 40
  • [43] Brazing of austenitic stainless steel with Ni-Cr-Si-P brazing filler metal
    Miyazawa, Y
    Matsu, K
    Miyamoto, Y
    Ariga, T
    JOINING OF ADVANCED AND SPECIALTY MATERIALS V, PROCEEDINGS, 2003, : 133 - 138
  • [44] Analysis of filler metal composition on weld dilution of austenitic stainless steel by TIG and MIG welding
    Gopalakrishna G.T.
    Ajaykumar B.S.
    Vishnu K.R.
    International Journal of Vehicle Structures and Systems, 2020, 12 (01) : 105 - 108
  • [45] Low temaperature sensitization of austenitic stainless steel
    Choudhuri, G
    Sinha, AK
    Kain, V
    Gurumurthy, KR
    Shah, BK
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2003, 56 (01): : 79 - 84
  • [46] Microstructure and corrosion behavior of shielded metal arc-welded dissimilar joints comprising duplex stainless steel and low alloy steel
    Srinivasan, P. Bala
    Muthupandi, V.
    Dietzel, W.
    Sivan, V.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2006, 15 (06) : 758 - 764
  • [47] Microstructure and corrosion behavior of shielded metal arc-welded dissimilar joints comprising duplex stainless steel and low alloy steel
    P. Bala Srinivasan
    V. Muthupandi
    V. Sivan
    P. Bala Srinivasan
    W. Dietzel
    Journal of Materials Engineering and Performance, 2006, 15 : 758 - 764
  • [48] STRENGTHENING OF AN AUSTENITIC STAINLESS-STEEL ALLOY BY CRYOFORMING
    OPOKU, J
    JOURNAL OF MATERIALS SCIENCE, 1981, 16 (03) : 844 - 849
  • [49] Ultimate strength of austenitic stainless steel fillet-welded connections with weld metal fracture
    Lee, HooChang
    Hwang, BoKyung
    Kim, TaeSoo
    THIN-WALLED STRUCTURES, 2017, 116 : 145 - 153
  • [50] Analysis of solidification process on austenitic stainless steel weld metal using synchrotron radiation-Study of solidification structure on austenitic stainless steel weld metal
    Osuki, Takahiro
    Yonemura, Mitsuharu
    Ogawa, Kazuhiro
    Konizo, Yu-Ichi
    Terasakio, Hidenori
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2007, 25 (01): : 215 - 223
12345