Wear cumulation of carbide tools under varying cutting speed condition

被引：0
|
作者：
Pang, Siqin
Yu, Qixun
机构：
来源：
Journal of Beijing Institute of Technology, English Language Issue | 1991年 / 11卷 / 03期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
According to characteristics of carbide tools, mathematical model was given. Experiments with YT14 (ISO P20) carbide tools cutting 38CrNi3MoVA high-strength steel were conducted. Theoretical results agree very well with the experimental data. Different modes of the variation in cutting speeds result in different wear cumulation rates. A semiempirical mathematical mode is reasonable to calculate the rate and some guidelines for the proper use of carbide tools are concluded.
引用
收藏
页码：46 / 50
相关论文
共 50 条
  • [31] Effect of grain refinement and composition on the wear of cemented carbide cutting tools
    Cheng, Jianbing
    Pang, Siqin
    Wang, Xibin
    Yu, Qixun
    RESEARCH IN MECHANICAL ENGINEERING AND MATERIAL SCIENCE, 2014, 456 : 507 - +
  • [32] ADHESION-FATIGUE WEAR OF CEMENTED-CARBIDE CUTTING TOOLS
    GUREVICH, DM
    SOVIET ENGINEERING RESEARCH, 1986, 6 (05): : 35 - 38
  • [33] PLASTIC WEAR OF CUTTING TOOLS WITH CEMENTED-CARBIDE TIPS.
    Zhilin, V.A.
    Steblenko, W.P.
    Machines & Tooling (English translation of Stanki i Instrument), 1976, 47 (03): : 22 - 23
  • [34] Wear rates and wear mechanisms of alumina-based tools cutting steel at a low cutting speed
    LoCasto, S
    LoValvo, E
    Lucchini, E
    Maschio, S
    Ruisi, VF
    WEAR, 1997, 208 (1-2) : 67 - 72
  • [35] Wear resistance of high-speed steel cutting tools
    V. M. Kishurov
    V. N. Ippolitov
    M. V. Kishurov
    Russian Engineering Research, 2012, 32 (2) : 186 - 188
  • [36] Wear mechanisms in high speed steel gear cutting tools
    Azizpour, M. Jalali
    Majd, H. Mohammadi
    World Academy of Science, Engineering and Technology, 2010, 70 : 363 - 365
  • [37] Wear mechanisms in high speed steel gear cutting tools
    Jalali Azizpour, M.
    Mohammadi Majd, H.
    World Academy of Science, Engineering and Technology, 2010, 69 : 363 - 365
  • [38] Influence of sintering condition on the tool wear of NbC-based Ni binder-cemented carbide cutting tools
    Fernandes, Laerte Jose
    Stoeterau, Rodrigo Lima
    Batalha, Gilmar Ferreira
    Rodrigues, Daniel
    Borille, Anderson Vicente
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (7-8): : 3575 - 3585
  • [39] Influence of sintering condition on the tool wear of NbC-based Ni binder-cemented carbide cutting tools
    Laerte Jose Fernandes
    Rodrigo Lima Stoeterau
    Gilmar Ferreira Batalha
    Daniel Rodrigues
    Anderson Vicente Borille
    The International Journal of Advanced Manufacturing Technology, 2020, 106 : 3575 - 3585
  • [40] FLANK WEAR ESTIMATION UNDER VARYING CUTTING CONDITIONS
    KOREN, Y
    KO, TR
    ULSOY, AG
    DANAI, K
    JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 1991, 113 (02): : 300 - 307
12345