CHEMICAL POLARIZATION OF 12Cr18Ni9Ti STEEL.

被引：0

作者：

Sorokina, L.A. ^{[1
]}

Rusetskaya, A.N. ^{[1
]}

Chinova, M.P. ^{[1
]}

机构：

[1] 'Medinstrument' Scientific &, Industrial Assoc, Kazan', USSR, 'Medinstrument' Scientific & Industrial Assoc, Kazan', USSR

来源：

Journal of applied chemistry of the USSR | 1987年 / 60卷 / 8 pt 2期

关键词：

ACIDS; -; ELECTROLYTES; SOLUTIONS; Viscosity;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A detailed study was carried out for the development of an effective electrolyte for the chemical polarization of 12Cr18Ni9Ti steel. Preliminary data on the kinetics of the CP (Chemical Polarization) process in the developed electrolyte obtained by the temperature-kinetic method in the region of potentials near that of chemical dissolution indicate that the activation energies for the chemical dissolution of steel are commensurate for the initial acid mixture and the developed electrolyte, in both cases being 5. 4-9. 5 kcal/mole. The developed CP electrolyte gave excellent results during production of an experimental batch of small parts made from 12Cr18Ni9Ti steel for flexible endoscopy instruments.

引用

页码：1756 / 1758

共 50 条

[31] FAILURE PROCESS AND CREEP RUPTURE OF 18Cr10Ni AUSTENITIC STEEL.
Hnilica, Frantisek
Pech, Radovan
Voboril, Josef
Metallic Materials (English translation of Kovove Materialy) (Cambridge, Engl), 1984, 22 (05): : 304 - 309
[32] THE EFFECT OF LENGTHY OPERATION ON THE SERVICE LIFE OF 12CR18NI12TI STEEL SUPERHEATING TUBES
SMIRNOVA, AP
BULANOV, YP
THERMAL ENGINEERING, 1987, 34 (11) : 620 - 622
[33] Inclusions containing Ti in con-cast bloom of 1Cr18Ni9Ti stainless steel
Chen, Derong
Wei, Ruihang
You, Dingfang
Li, Gang
Lu, Longsun
Chen, Zhengyan
Kang T'ieh/Iron and Steel (Peking), 1988, 23 (08): : 16 - 20
[34] 12Cr1MoV-1Cr18Ni9Ti氩弧焊接工艺分析
常学军
段春福
焊接, 2001, (04) : 20 - 22
[35] Microstructure of 1Cr18Ni9Ti stainless steel by cryogenic compression deformation and annealing
Wang, TS
Peng, JG
Gao, YW
Zhang, FC
Jing, TF
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 407 (1-2): : 84 - 88
[36] Permeation of hydrogen through 1Cr18Ni9Ti stainless steel with TiC film
Xiong, Yi-Fu
Lei, Qiang-Hua
Chen, Chang-An
He-Huaxue yu Fangshe Huaxue/Journal of Nuclear and Radiochemistry, 2008, 30 (01): : 47 - 50
[37] Texture of Magnetron Sputter-deposited 1Cr18Ni9Ti Stainless Steel
王福会
楼翰一
刘大成
曹楚南
Journal of Materials Science & Technology, 1989, (01) : 53 - 54
[38] Nanograined 1Cr18Ni9Ti stainless steel prepared by cryogenic deformation and annealing
Wang, TS
Peng, JG
Li, XY
Wang, ZT
RARE METAL MATERIALS AND ENGINEERING, 2005, 34 : 171 - 174
[39] Vibration Drilling the 0Cr18Ni9Ti Stainless Steel Micro-hole
Zhang, Peng
Mei, Changhong
Guo, Xingyu
ADVANCED MATERIALS AND PROCESS TECHNOLOGY, PTS 1-3, 2012, 217-219 : 1592 - +
[40] Surface modification of 0Cr18Ni9Ti stainless steel by Zr-alloying
Cai, Hangwei
Gao, Yuan
Ma, Zhikang
Wang, Chenglei
Zhang, Yan
Wu, Weiqin
Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2013, 33 (11): : 1133 - 1138

← 1 2 3 4 5 →