Diffusion Processes between Ni-Cr-B-Si ALLOYS AND FERROUS MATERIALS.

被引：0
|
作者：
Lugscheider, E.
Knotek, O.
Reimann, H.
机构：
来源：
Veitsch-Radex Rundschau | 1973年 / 05期
关键词：
CAST IRON - Hardfacing - GLASS MANUFACTURE - STEEL - Hard Facing;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Tests were carried out on nine diffusion couples consisting of five different Ni-Cr-B - Si-Fe-Mn hard facing alloys and steel or cast iron substrates. This combination is used commercially for production of preforming gages in hollow glassware manufacture. The results show a clear dependence of diffusion coefficients on the concentration of each alloy element, annealing temperature, and matrix composition. Data are plotted.
引用
收藏
页码：655 / 663
相关论文
共 50 条
  • [41] Comparison of Ni-Cr-B-Si alloy-based composite coatings with refractory borides formed by different methods
    Inst Metallurgii UrO RAN, Ekaterinburg, Russia
    Fiz Khim Obr Mater, 1 (63-68):
  • [42] Peculiarities of Ni-Cr-B-Si alloy-based composite coatings. The coatings microstructure studies
    Klinskaya-Rudenskaya, N.A.
    Kopysov, V.A.
    Fizika i Khimiya Obrabotki Materialov, 1995, (01): : 69 - 81
  • [43] Brazing stainless steel using a new MBF-series of Ni-Cr-B-Si amorphous brazing foils
    Allied Signal, Morristown, United States
    Welding in the World, Le Soudage Dans Le Monde, 1998, 41 (06): : 466 - 478
  • [44] Assessment of diffusional mobilities of Cr, Ni, and Si in fcc Cr-Ni-Si alloys
    Du, Yong
    Schuster, J.C.
    Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 2001, 92 (01): : 28 - 31
  • [45] Influence of Chromium Concentration on the Abrasive Wear of Ni-Cr-B-Si Coatings Applied by Supersonic Flame Jet (HVOF)
    Kandeva, Mara
    Kalitchin, Zhetcho
    Stoyanova, Yana
    METALS, 2021, 11 (06)
  • [46] Brazing stainless steel using a new MBF-series of Ni-Cr-B-Si amorphous brazing foils
    Rabinkin, A.
    Wenski, E.
    Ribaudo, A.
    Welding Journal (Miami, Fla), 1998, 77 (02):
  • [47] Reactive phase formation in the diffusion zone between Si3N4 and Ni-Cr alloys
    Kodentsov, A.A.
    Kivilahti, J.K.
    van Loo, F.J.J.
    Materials Science Forum, 1994, 155-5 : 565 - 568
  • [48] Microstructural design of hardfacing Ni-Cr-B-Si-C alloys
    Hemmati, I.
    Huizenga, R. M.
    Ocelik, V.
    De Hosson, J. Th M.
    ACTA MATERIALIA, 2013, 61 (16) : 6061 - 6070
  • [49] Ni-Cr-B-Si等离子喷涂层加热重熔后组织与性能
    揭晓华
    毛志远
    金属热处理, 1996, (08) : 15 - 17+29
  • [50] Brazing stainless steel using a new MBF-series of Ni-Cr-B-Si amorphous brazing foils
    Rabinkin, A
    Wenski, E
    Ribaudo, A
    WELDING JOURNAL, 1998, 77 (02) : 66S - 75S
12345