HOT-PRESSING OF THE AlN-Al2O3 SYSTEM.

被引:36
|
作者
Sakai, Tosikazu
机构
来源
| 1978年 / 86卷 / 03期
关键词
ALUMINUM NITRIDE;
D O I
10.2109/jcersj1950.86.991_125
中图分类号
学科分类号
摘要
Aluminum nitride was studied as a candidate material for composite materials. Its refractory as well as thermal properties were examined. The powder mixtures in the AlN-Al//2O//3 system were hot-pressed under 200 kg/cm**2 at 1600 to 2100 degree C for one hour. The effect of Al//2O//3 addition on the densification rate was remarkable especially in the AlN rich composition range. Several crystalline phases were observed in the hot-pressed specimens. Oxynitride of spinel type was formed at 1700 degree C in the entire range of the system. The oxynitride reacted on AlN at the temperature higher than 1900 degree C and the pseudo-polytypes of AlN were formed.
引用
收藏
页码:125 / 130
相关论文
共 50 条
  • [21] PREPARATION OF ALN-AL2O3 COMPOSITE VIA REACTION BONDING
    CAI, KF
    NAN, CW
    YUAN, RZ
    CHINESE SCIENCE BULLETIN, 1995, 40 (10): : 879 - 880
  • [22] Mechanical properties of Al2O3-NbC composites produced by hot-pressing
    Acchar, W
    Diniz, M
    Cairo, CA
    ADVANCED POWDER TECHNOLOGY III, 2003, 416-4 : 645 - 650
  • [23] Mechanical properties and microstructure of Al2O3-TiC composite by hot-pressing
    Shi, Suilin
    Zhang, Lingzhen
    HIGH-PERFORMANCE CERAMICS IV, PTS 1-3, 2007, 336-338 : 1424 - +
  • [24] REACTIVE HOT-PRESSING OF GAMMA-AL2O3 WITH SYNTHETIC FLUORINE MICAS
    MCCAULEY, JW
    GAZZARA, CP
    AMERICAN CERAMIC SOCIETY BULLETIN, 1971, 50 (04): : 377 - &
  • [25] HOT-PRESSING AND MECHANICAL PROPERTIES OF AL2O3 WITH AN MO-DISPERSEDPHASE
    RANKIN, DT
    STIGLICH, JJ
    PETRAK, DR
    RUH, R
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1971, 54 (06) : 277 - &
  • [26] Influence of hot-pressing technology on Al2O3-TiC ceramic material
    Li, Shile
    Fenmo Yejin Jishu/Powder Metallurgy Technology, 1996, 14 (03): : 201 - 205
  • [27] INFLUENCE OF ZRO2 ADDITIONS ON THE KINETICS OF HOT-PRESSING OF AL2O3
    HARMER, MP
    BROOK, RJ
    AMERICAN CERAMIC SOCIETY BULLETIN, 1981, 60 (03): : 385 - 385
  • [28] HIGH-FREQUENCY SAW DEVICES ON ALN-AL2O3
    KAGIWADA, RS
    YEN, KH
    LAU, KF
    IEEE TRANSACTIONS ON SONICS AND ULTRASONICS, 1979, 26 (02): : 175 - 175
  • [29] Effect of La2O3 on properties of Al2O3 materials by hot-pressing sintering
    Wang, Wenhan
    Li, Xiaoyun
    Qiu, Tai
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2011, 28 (05): : 145 - 149
  • [30] Preparation of AlN-Al2O3 composite via reaction bonding
    蔡克峰
    南策文
    袁润章
    Chinese Science Bulletin, 1995, (10) : 879 - 880