The elastic modulus of dentine determined by static and dynamic methods

被引：40

作者：

Rees, J.S. ^{[1
]}

Jacobsen, P.H. ^{[1
]}

Hickman, J. ^{[1
]}

机构：

[1] Department of Conservative Dentistry, University Wales College of Medicine, Heath Park, Cardiff CF4 4XY, United Kingdom

来源：

Clinical Materials | 1994年 / 17卷 / 01期

关键词：

Dental amalgams - Elastic moduli - Finite element method - Testing;

D O I：

10.1016/0267-6605(94)90042-6

中图分类号：

学科分类号：

摘要：

The purpose of this investigation was to determine a static elastic modulus of dentine using a three point beam test and a dynamic modulus in the frequency range of 0.1 Hz and 10 Hz across a temperature range of 27-37°C. At body temperature, the mean static modulus was 8.6 GPa, (standard deviation 0.86 GPa). The dynamic test produced a range of modulus values. At 0.1 Hz the modulus ranged from 14.3 to 15.2 GPa; for 1.0 Hz the range was 14.6-15.5 GPa and for 10 Hz the range was 14.9-15.8 GPa. The results are of value in the design and analysis of restorative materials.

引用

页码：11 / 15

共 50 条

[31] Elastic modulus and hardness of muscovite and rectorite determined by nanoindentation
Zhang, Guoping
Wei, Zhongxin
Ferrell, Ray E.
APPLIED CLAY SCIENCE, 2009, 43 (02) : 271 - 281
[32] The elastic modulus of Matrigel™ as determined by atomic force microscopy
Soofi, Shauheen S.
Last, Julie A.
Liliensiek, Sara J.
Nealey, Paul F.
Murphy, Christopher J.
JOURNAL OF STRUCTURAL BIOLOGY, 2009, 167 (03) : 216 - 219
[33] The effect of confining pressure on elastic wave velocities and dynamic to static Young's modulus ratio
Asef, Mohammad Reza
Najibi, Ali Reza
GEOPHYSICS, 2013, 78 (03) : D135 - D142
[34] Elastic Modulus Determination of Transgenic Aspen Using a Dynamic Mechanical Analyzer in Static Bending Mode
Horvath, Balazs
Peszlen, Ilona
Peralta, Perry
Horvath, Laszlo
Kasal, Bohumil
Li, Laigeng
FOREST PRODUCTS JOURNAL, 2010, 60 (03) : 296 - 300
[35] COMPARISON OF PARTITION COEFFICIENTS DETERMINED BY STATIC AND DYNAMIC METHODS ON POROUS GLASS BEADS
GRUBISICGALLOT, Z
BENOIT, H
JOURNAL OF CHROMATOGRAPHIC SCIENCE, 1971, 9 (05) : 262 - +
[36] INTERPRETATION OF THE DIFFERENCE IN THE SURFACE-DIFFUSION COEFFICIENTS DETERMINED BY DYNAMIC AND STATIC METHODS
IKUMA, Y
KOMATSU, W
SOLID STATE IONICS, 1988, 26 (02) : 161 - 161
[37] INTERPRETATION OF THE DIFFERENCE IN SURFACE-DIFFUSION COEFFICIENTS DETERMINED BY DYNAMIC AND STATIC METHODS
IKUMA, Y
KOMATSU, W
SOLID STATE IONICS, 1989, 32-3 : 946 - 949
[38] THE DYNAMIC ELASTIC MODULUS OF THE ARTERIAL WALL
BERGEL, DH
JOURNAL OF PHYSIOLOGY-LONDON, 1960, 151 (03): : P26 - P27
[39] Dynamic elastic modulus of 'packable' composites
Abe, Y
Lambrechts, P
Inoue, S
Braem, MJA
Takeuchi, M
Vanherle, G
Van Meerbeek, B
DENTAL MATERIALS, 2001, 17 (06) : 520 - 525
[40] Comparison of static and dynamic methods for measuring stiffness of high modulus steels and metal composites
Lord, J. D.
Morrell, R. M.
CANADIAN METALLURGICAL QUARTERLY, 2014, 53 (03) : 292 - 299

← 1 2 3 4 5 →