INFLUENCE OF THE AMOUNT OF AUSTENITE ON THE TOUGHNESS OF TWO PHASE STAINLESS STEELS.

被引:0
|
作者
Hoshino, Akihiko
Nakano, Keishi
Kanao, Masao
机构
关键词
STEEL - Mechanical Properties;
D O I
10.2355/tetsutohagane1955.65.1_70
中图分类号
学科分类号
摘要
In heating at 700 degree C, the ferritic alloy was embrittled by carbide precipitation. In the alloys containing more than 20% gamma , there was no embrittlement. Marked embrittlement is observed after prolonged heating by formation of sigma phase. The embrittlement by sigma phase produced by decomposition of ferrite could not be reduced by coexisting gamma . On aging at 500 degree C of water-quenched specimens, the maximum increases in hardness and Charpy impact transition temperature appeared at 20% gamma , where the maximum residual stress of ferrite was observed.
引用
收藏
页码:70 / 79
相关论文
共 50 条
  • [31] DEVELOPMENTS IN THE WELDING OF STAINLESS STEELS.
    Anon
    1600, (55):
  • [32] ARC WELDABILITY OF STAINLESS STEELS.
    Walker, R.A.
    Gooch, T.G.
    Metals and Materials (Institute of Metals), 1986, 2 (01): : 18 - 24
  • [33] PRESS FORMABILITY OF STAINLESS STEELS.
    Blom, Karl-Johan
    Sheet Metal Industries, 1980, 57 (01): : 25 - 26
  • [34] PASSIVE STATE OF STAINLESS STEELS.
    Elfstrom, Bengt Olof
    Chalmers Tekniska Hogskola, Doktorsavhandlingar, 1981, (356):
  • [35] INFLUENCE OF THE SURFACE STATE ON THE INITIATION OF CREVICE CORROSION ON STAINLESS STEELS.
    Sydberger, T.
    Werkstoffe und Korrosion, 1981, 32 (03): : 119 - 128
  • [36] Influence of chemical composition on pitting corrosion resistance of stainless steels.
    Otero, E
    Utrilla, MV
    Ureña, A
    Múnez, CJ
    BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 2004, 43 (02): : 190 - 192
  • [37] Ferrite in Austenitic Stainless Steels.
    Trusculescu, M.
    Takacs, O.
    Sarbu, N.
    Metalurgia Bucuresti, 1981, 33 (12): : 648 - 652
  • [38] Effect of Phase Transformation on Work Hardening of Austenitic Stainless Steels.
    De Sousa e Silva, Antonio Sergio
    Monteiro, Sergio Neves
    1600, (33):
  • [39] NEW FERRITIC STAINLESS STEELS.
    Jackson, R.
    BHP Technical Bulletin (Broken Hill Proprietary), 1976, 20 (01): : 37 - 38
  • [40] ACOUSTIC EMISSION IN STAINLESS STEELS.
    Possa, G.
    1600, (02):