CUTTING PERFORMANCE OF ACID ETCHED CERAMIC TOOLS.

被引：0
|
作者：
Ham, Inyong
Odrey, Nicholas
Biggers, James V.
Licht, Robert H.
机构：
来源：
Technical Paper - Society of Manufacturing Engineers | 1974年 / MR74-103 Apr 29-May 3 974期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Nine commercial ceramic tools were randomly selected and etched in HF acid for periods up to thirty minutes to alter surface characteristics of the ceramic tools to determine the effect of an impact resistance in interruped cutting. All treated and non-treated tools were randomly tested in machining of grooved ALSL-4340 steel test bars until complete failure. Each of the treated ceramic tools showed considerable improvement in the number of impacts to failure compared to the non-treated tools of the same grades. In all cases, therefore, shock resistance improvements were effected by the acid etching treatments.
引用
收藏
相关论文
共 50 条
  • [31] EXPERIMENTS ON THE CUTTING STABILITY OF MACHINE TOOLS.
    Tang Hengling
    Ji Chuang/Machine Tools, 1987, (07): : 16 - 18
  • [32] METAL-CUTTING MACHINE TOOLS.
    Elyasberg, M.E.
    Demchenko, V.A.
    Soviet engineering research, 1987, 7 (08): : 53 - 56
  • [33] HYDROSTATIC EXTRUSION OF PROFILED CUTTING TOOLS.
    Chernyi, Yu.F.
    Russian Engineering Journal (English translation of Vestnik Mashinostroeniya), 1976, 56 (01): : 63 - 65
  • [34] UPDATE - NEW DEVELOPMENTS IN CUTTING TOOLS.
    Kalish, Herbert S.
    Carbide and Tool Journal, 1980, 12 (03): : 8 - 13
  • [35] Wear Reduction in Cutting and Forming Tools.
    Cornely, Hans
    Werkstatt und Betrieb, 1980, 113 (04): : 273 - 276
  • [36] CUTTING PERFORMANCE OF CERMET, CERAMIC, CUBIC BORON-NITRIDE, AND SINTERED DIAMOND TOOLS .3. CUTTING PERFORMANCE OF CERAMIC TOOLS
    TANAKA, C
    DATE, H
    NAKAO, T
    TAKAHASHI, A
    MOKUZAI GAKKAISHI, 1988, 34 (04): : 298 - 304
  • [37] DETERMINATION OF ECONOMIC CUTTING SPEED AND TOOL LIFE OF CUTTING TOOLS.
    Goyal, S.K.
    Journal of the Institution of Engineers (India): Mechanical Engineering Division, 1982, 63 : 72 - 74
  • [38] LABORATORY COMPARISON OF THREE ROCK CUTTING TOOLS.
    Hurt, K.G.
    Laidlaw, D.D.
    Tunnels and Tunnelling, 1979, 11 (04): : 13 - 16
  • [39] Influence of Operating Parameters on Performance Indices of Drilling by the Combined Cutting and Milling Tools.
    Peretolchin, V.A.
    Chudogashev, E.V.
    Izvestiya Vysshikh Uchebnykh Zavedenii, Gornyi Zhurnal, 1973, (08): : 68 - 73
  • [40] Cutting Performance of Ceramic Tools in Turning of Mild Steel
    Tanaka, Ryutaro
    Hosokawa, Akira
    Furumoto, Tatsuaki
    Ueda, Takashi
    EMERGING TECHNOLOGY IN PRECISION ENGINEERING XIV, 2012, 523-524 : 493 - +
12345