Control method to widen frequency bandwidth of switching regulator with two-degrees-of-freedom control system based on coprime factorization description and its characteristics

被引:0
|
作者
机构
[1] Sugimoto, Hidehiko
[2] Morishima, Yasuyuki
来源
Sugimoto, Hidehiko | 1600年 / Scripta Technica Inc, New York, NY, United States卷 / 115期
关键词
Bandwidth - Computer simulation - Degrees of freedom (mechanics) - Dynamics - Feedback - Switching;
D O I
暂无
中图分类号
学科分类号
摘要
This paper describes a control method to widen the frequency bandwidth of a voltage control system for a switching regulator, which is based on a coprime factorization description of the system. First, this paper clarifies the control performance of a conventional voltage control method with a proportional-integral control element and a phase lead element, which does not widen the frequency bandwidth enough. Next, a new voltage control method with a compensator based on the coprime factorization description of the system is proposed. The compensator employs a two-degrees-of-freedom control system, and is made up of a stabilizing dynamic compensator and a reference signal response dynamic compensator. Furthermore, one possible design of the two dynamic compensators, and the simulation and experimental results for the test switching regulator are presented.
引用
收藏
相关论文
共 50 条
  • [41] A design method of a generalized predictive control system based on parametrization of two-degree-of-freedom integral controllers
    Naganawa, A
    Aida, K
    Obinata, G
    ELECTRICAL ENGINEERING IN JAPAN, 1999, 129 (02) : 62 - 70
  • [42] A method of suppressing low-frequency oscillation in traction network based on two-degree-of-freedom internal model control
    Leng Y.
    Yang H.
    Wang Z.
    Dianwang Jishu/Power System Technology, 2017, 41 (01): : 258 - 264
  • [43] Load Frequency Control of Two-Area Interconnected Power System Using Fuzzy Logic-Based PI Control Method
    An, Aimin
    Chen, Yixin
    Zhang, Haochen
    Liu, Fuchao
    Zheng, Jingjing
    PROCEEDINGS OF THE 2015 CHINESE INTELLIGENT AUTOMATION CONFERENCE: INTELLIGENT TECHNOLOGY AND SYSTEMS, 2015, 338 : 297 - 307
  • [44] OUTPUT-FEEDBACK CONTROL-SYSTEM SYNTHESIS METHOD BASED ON IMPROVED OPTIMAL REGULATOR THEORY AND ITS APPLICATION
    TSUCHIYA, T
    WANG, JQ
    IEEE TRANSACTIONS ON AUTOMATIC CONTROL, 1985, 30 (11) : 1126 - 1129
  • [45] A neutral point potential control for three-level neutral-point-clamped converters based on the search optimization method of the two degrees of freedom
    Guan, Bo
    Doki, Shinji
    IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING, 2018, 13 (08) : 1196 - 1207
  • [46] Data-Driven Load Frequency Control for Multi-Area Power System Based on Switching Method under Cyber Attacks
    Tian, Guangqiang
    Wang, Fuzhong
    ALGORITHMS, 2024, 17 (06)
  • [47] Effective Load Frequency Control of Power System with Two-Degree Freedom Tilt-Integral-Derivative Based on Whale Optimization Algorithm
    Sahu, Preeti Ranjan
    Simhadri, Kumaraswamy
    Mohanty, Banaja
    Hota, Prakash Kumar
    Abdelaziz, Almoataz Y.
    Albalawi, Fahad
    Ghoneim, Sherif S. M.
    Elsisi, Mahmoud
    SUSTAINABILITY, 2023, 15 (02)
  • [48] Emergency frequency control method for power system containing wind generation based on coordination of frequency-autonomous-response, constant-power-control-switching and generator-tripping or load-shedding
    Ouyang, Jinxin
    Bi, Shuqi
    Zhang, Aogui
    Xu, Shoudong
    Wang, Jian
    INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS, 2024, 162
  • [49] Synthesis of a Two Degrees of Freedom Wireless Networked Digital Servo Control System With Dynamic State Prediction Based on a Gated Recurrent Unit-Based Round Trip Time Predictor
    Nonomura, Tatsuki
    Fujii, Fumitake
    IEEE ACCESS, 2022, 10 : 64185 - 64198
  • [50] Early fault state identification method of the rod control system power equipment based on time-frequency characteristics fusion and GWO-ELM
    Tang S.
    Ma C.
    Gou Z.
    Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument, 2023, 44 (01): : 121 - 130