Use of extraction and electronic diffraction replicas for precipitates characterization in welded Cr-Mo steels

被引：0
|
作者：
de Saiz-Solabarria, S.Gutierrez [1 ]
San Juan Nunez, J.M. [1 ]
机构：
[1] Universidad del Pais Vasco, Bilbao, Spain
来源：
Revista de soldadura | 1997年 / 27卷 / 01期
关键词：
Atomic spectroscopy - Chromium alloys - Electric discharges - Electron diffraction - Emission spectroscopy - Extraction - Plasma applications - Precipitation (chemical) - Steel;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The precipitates and phases found in the structure of welded joints of Heat Interchanges Tubes were studied and identified. The base material satisfied the requirements of ASME Sec II, SA 213 Gr T22 (2 1/4 Cr 1 Mo). Compositions of Filler Metals were: 2 1/4 Cr 1 Mo and 2 1/4 Cr 1 Mo 1/4 Nb. The chemical composition of base and weld materials were analyzed by atomic emission spectroscopy in high vacuum electric discharge and by inductive plasma coupled. For the constituents characterization extraction and diffraction microscopy replicas were used.
引用
收藏
页码：11 / 16
相关论文
共 50 条
  • [41] Identification and Visualization of Fine Precipitates in a Cr-Mo Steel Based on SEM Contrast
    Nakamura, Takaya
    Sato, Kaoru
    Nagoshi, Masayasu
    Ogata, Kenji
    Kitahara, Yasuko
    Sakurada, Tsuguo
    MATERIALS TRANSACTIONS, 2019, 60 (08) : 1591 - 1597
  • [42] SCANNING AUGER INVESTIGATIONS OF EMBRITTLEMENT PHENOMENA IN CR-NI AND CR-MO STEELS
    GORETZKI, H
    VONROSENSTIEL, P
    SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY, 1985, 40 (5-6) : 853 - 858
  • [43] Identification and Visualization of Fine Precipitates in a Cr-Mo Steel Using SEM Contrasts
    Nakamura, Takaya
    Sato, Kaoru
    Nagoshi, Masayasu
    Ogata, Kenji
    Kitahara, Yasuko
    Sakurada, Tsuguo
    JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2018, 82 (05) : 169 - 175
  • [44] Computer simulation of the high temperature creep behaviour of Cr-Mo steels
    Hore, S.
    Ghosh, R. N.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (19-20): : 6095 - 6102
  • [45] THE MECHANISMS AND DETECTION OF EMBRITTLEMENT IN CR-MO PRESSURE-VESSEL STEELS
    MOSS, CJ
    KELLY, PM
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1994, 17 (03) : 369 - 380
  • [46] Precipitation behavior of fine MX type carbide in Cr-Mo steels
    Yuga, Masao
    Hayashi, Kenji
    Endo, Shigeru
    Zairyo/Journal of the Society of Materials Science, Japan, 2015, 64 (09) : 732 - 738
  • [47] EFFECTS OF CR AND V ON THE HYDROGEN ATTACK SUSCEPTIBILITY OF B ADDED CR-MO STEELS
    ISHIGURO, T
    OHNISHI, K
    WATANABE, J
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (01): : 70 - 77
  • [48] EFFECT OF ALLOY ELEMENTS ON SUSCEPTIBILITY TO HYDROGEN EMBRITTLEMENT IN CR-MO STEELS
    IIDA, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 70 (13): : 1485 - 1485
  • [49] INFLUENCE OF TEMPERING TEMPERATURE ON HYDROGEN AND SULFIDE CRACKING OF CR-MO STEELS
    SERGEEVA, TK
    KABLUKOVSKAYA, MA
    KONNOVA, IY
    METAL SCIENCE AND HEAT TREATMENT, 1984, 26 (3-4) : 322 - 325
  • [50] EFFECTS OF ALLOY ELEMENTS ON SUSCEPTIBILITY TO HYDROGEN EMBRITTLEMENT IN CR-MO STEELS
    IIDA, T
    NAOI, T
    OHTSUKA, H
    TAKAHASHI, I
    OHTOMO, A
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 25 (06) : B198 - B198
12345