Combined influence of sulfur and managanese on reheat cracking of 1Cr- 1/2 Mo steel. (Study of reheat cracking of Cr-Mo steels, report 8)

被引：0
|
作者：
Tamaki, Koreaki [1 ]
Suzuki, Jippei [1 ]
Tate, Hitoshi [1 ]
机构：
[1] Mie Univ, Mie, Japan
来源：
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society | 1990年 / 8卷 / 02期
关键词：
Steel;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：53 / 58
相关论文
共 50 条
  • [31] HYDROGEN ATTACK IN CR-MO STEELS .3. EFFECT OF SI, MN AND TI ON HYDROGEN ATTACK IN 2 1/4 CR-1MO STEEL
    TAKANO, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 70 (13): : 1484 - 1484
  • [32] MECHANISM OF STRESS RELIEF CRACKING IN 21/4CR-1MO STEEL
    SWIFT, RA
    WELDING JOURNAL, 1971, 50 (05) : S195 - &
  • [33] Method and Criteria to Evaluate Reheat Cracking Susceptibility The notched C-ring test method and evaluation criteria is used to evaluate reheat cracking susceptibility in the coarse grain heat-affected zone of 2.25Cr1Mo0.25V steel
    Zhang, L.
    Wang, K.
    Huang, Y.
    Xu, C.
    Chen, J.
    WELDING JOURNAL, 2020, 99 (06) : 175 - 183
  • [34] Temper embrittlement in the HAZ of 2 1/4 Cr-1Mo steel induced by reheating after SR treatment: Study of temper embrittlement in HAZ of Cr-Mo steels (4th Report)
    Kawakami, H.
    Tamaki, K.
    Suzuki, J.
    Ichikawa, Y.
    Welding Research Abroad, 1999, 45 (05): : 19 - 27
  • [35] CORROSION-FATIGUE (CIRCUMFERENTIAL) CRACKING IN CR-MO LOW-ALLOY BOILER TUBE STEELS .1. INITIATION AND PROPAGATION
    SMITH, BJ
    MARDER, AR
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1992, 114 (03): : 265 - 269
  • [36] REDUCTION OF CARBON CONTENT AND PREVENTION OF WELD CRACKING IN 1 one quarter Cr- one-half Mo STEEL.
    Matsumoto, Toshimi
    Yada, Masami
    Hataya, Fumio
    Yamaguchi, Yuji
    Kita, Hisanao
    Ohshima, Yoshikuni
    Ueda, Syuzo
    Kusuhara, Yuji
    1600, (03):
  • [37] RECOVERY OF CREEP-PROPERTIES OF A VANADIUM-STRENGTHENED STEEL (1CR1MO0.75VTIB) BY REHEAT TREATMENT
    STEVENS, RA
    FLEWITT, PEJ
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1984, 15 (04): : 707 - 718
  • [38] Influence of weld heat inputs on reheat cracking sensitivity of coarse-grained heat affected zones in 2.25Cr1MoV steel
    Han, Yichun
    Chen, Xuedong
    Fan, Zhichao
    Bu, Huaquan
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2015, 51 (06): : 2 - 8
  • [39] FAILURE OF A SEAMLESS 2 1/4 Cr-1Mo HOT-REHEAT PIPE BEND - METALLURGICAL CONSIDERATIONS
    Thornley, J. Cliff
    Speelman, John L.
    Griffin, Rob
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2010, VOL 6, PTS A AND B, 2010, : 571 - 588
  • [40] Influence of conditions of SR treatment on low-ductility creep-fracture in HAZ of Cr-Mo steels - study of low-ductility creep-fracture in HAZ of Cr-Mo steels (Report 2)
    Tamaki, Koreaki
    Kawakami, Hiroshi
    Suzuki, Jippei
    Kondoh, Takeshi
    Morisawa, Shiro
    Welding Research Abroad, 1999, 45 (11):
12345