Effect of Postweld Heat Treatments on the Hardness and Microstructure of 17% Cr Ferritic Stainless Steels.

被引：0

作者：

Resende de Castro, Ana Luiza ^{[1
]}

Mirra de Paula e Silva, Evandro ^{[1
]}

Modenesi, Paulo Jose ^{[1
]}

机构：

[1] PUC, Braz, PUC, Braz

来源：

Metalurgia ABM | 1986年 / 42卷 / 346期

关键词：

STAINLESS STEEL - Weldability - WELDING - Stainless Steel;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Poor weldability is the main obstacle that prevents greater utilization of 17% chromium ferritic stainless steels. As far as the mechanical properties are concerned, the welds of this steel are characterized by low toughness and ductility. In the present paper the effect of postweld heat treatments on the microstructure and hardness of AISI 430 steels was studied. Alloys with addition of niobium and titanium were also investigated. The TIG process without filler metal was employed in welding the materials. Postweld heat treatments consisted of isothermal annealing in the temperature range 250 to 900 degree C for 30 min, followed by air cooling. No sensitive changes in microstructure were observed after the postweld heat treatments. The changes in hardness were more remarkable.

引用

页码：645 / 647

共 50 条

[21] Effect of Co addition on microstructure in high Cr ferritic steels
Yamada, K
Igarashi, M
Muneki, S
Abe, F
ISIJ INTERNATIONAL, 2003, 43 (09) : 1438 - 1443
[22] The influence of certain treatments on the microstructure of nickel steels.
Guillet, L
COMPTES RENDUS HEBDOMADAIRES DES SEANCES DE L ACADEMIE DES SCIENCES, 1903, 136 : 502 - 504
[23] EFFECT OF NICKEL ON STRESS CORROSION CRACKING OF 23% Cr STAINLESS STEELS.
Kiuchi, Kiyoshi
Shimodaira, Saburo
1984, (33):
[24] FABRICATION OF FERRITIC-AUSTENITIC STAINLESS STEELS. PART A.
Larsson, Bertil
Lundqvist, Berthold
Materials and Design, 1986, 7 (01): : 33 - 37
[25] Recrystallization microstructure and texture features of 17% Cr ferritic stainless steel sheet
Research Institute of Metallurgy Engineering, University of Science and Technology Beijing, Beijing, China
Cailiao Rechuli Xuebao, 2 (72-76):
[26] MICROSTRUCTURE INFLUENCES THE CREEP PROPERTIES OF FERRITIC CREEP RESISTANT STEELS.
Gope, N.
Sharma, S.
Chakravarty, P.K.
Transactions of the Indian Institute of Metals, 1983, 37 (05): : 640 - 645
[27] INTERGRANULAR CORROSION RESISTANCE OF 17% Cr FERRITIC STAINLESS STEELS WHEN OVERHEATED.
Bejan, F.
Radovici, C.
Nuta, D.
Banu, A.
Key Engineering Materials, 1987, 20-28 (pt 1-4)
[28] OPTIMIZED POSTWELD HEAT-TREATMENT PROCEDURES FOR 17-4-PH STAINLESS-STEELS
BHADURI, AK
SUJITH, S
SRINIVASAN, G
GILL, TPS
MANNAN, SL
WELDING JOURNAL, 1995, 74 (05) : S153 - S159
[29] EFFECT OF HEAT TREATMENT ON THE PROPERTIES OF WELDED JOINTS OF STAINLESS MARAGING STEELS.
Krasnikova, S.I.
Drobot, A.V.
Kuz'menko, S.I.
Lisnichenko, L.N.
Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya, 1987, (08): : 97 - 101
[30] Effect of heat treatments on hardness and precipitation in 2.25Cr-1Mo-NiNb stabilized ferritic steel
Akhter, JI
Ahmad, M
Shaikh, MA
Ehrlich, K
JOURNAL OF MATERIALS SCIENCE LETTERS, 1996, 15 (10) : 905 - 908

← 1 2 3 4 5 →