Fatigue strength improvement of lap joints of thin steel plates for automobile use by using low transformation temperature welding material

被引：0
|
作者：
Ohta, A. [1 ]
Matsuoka, K. [1 ]
Nguyen, N.T. [1 ]
Maeda, Y. [1 ]
Suzuki, N. [1 ]
机构：
[1] National Inst. for Materials Sci., Sengen, Tsukuba, 305-0047, Japan
来源：
Zairyo/Journal of the Society of Materials Science, Japan | 2001年 / 50卷 / 10期
关键词：
Austenite - Compressive stress - Cooling - Fatigue of materials - Low temperature effects - Martensite - Phase transitions - Plate metal - Residual stresses - Strain - Welding - Welds;
D O I：
10.2472/jsms.50.1086
中图分类号：
学科分类号：
摘要：
The fatigue strength of lap welded joints of thin steel plate for automobile use was improved by using low transformation temperature welding material which induced the compressive residual stress around welded part. The transformation of welding material from austenite to martensite begins around 200°C and finishes around room temperature. The expansion of weld metal due to the transformation was constrained by the surrounding base metal, and the compressive residual stress is induced in the as welded condition. The mean stress effect due to this compressive residual stress improved the fatigue strength.
引用
收藏
页码：1086 / 1090
相关论文
共 50 条
  • [21] Elongated bead weld method for improvement of fatigue properties in welded joints of ship hull structures using low transformation temperature welding materials
    C. Shiga
    H. Murakawa
    K. Hiraoka
    N. Osawa
    H. Yajima
    T. Tanino
    S. Tsutsumi
    T. Fukui
    H. Sawato
    K. Kamita
    T. Matsuzaki
    T. Sugimura
    T. Asoda
    K. Hirota
    Welding in the World, 2017, 61 : 769 - 788
  • [22] The use of peak stresses for fatigue strength assessments of welded lap joints and cover plates with toe and root failures
    Meneghetti, Giovanni
    ENGINEERING FRACTURE MECHANICS, 2012, 89 : 40 - 51
  • [23] Fatigue strength improvement of welded structures using new low transformation temperature filler materials
    Bhatti, A. A.
    Barsoum, Z.
    van der Mee, V.
    Kromm, A.
    Kannengiesser, T.
    FATIGUE DESIGN 2013, INTERNATIONAL CONFERENCE PROCEEDINGS, 2013, 66 : 192 - 201
  • [24] Fatigue strength of steel-aluminum alloy dissimilar lap joints fabricated by dimple spot welding for automotive application
    Sakaguchi, Motoki
    Kurokawa, Yu
    Nakamura, Fuminori
    Hashimura, Toru
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2024, 47 (03) : 939 - 951
  • [25] Fatigue life improvement using low transformation temperature weld material with measurement of residual stress
    不详
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 182
  • [26] Fatigue life improvement using low transformation temperature weld material with measurement of residual stress
    Franks, Jordan
    Wheatley, Greg
    Zamani, Pedram
    Nejad, Reza Masoudi
    Macek, Wojciech
    Branco, Ricardo
    Samadi, Farzaneh
    INTERNATIONAL JOURNAL OF FATIGUE, 2022, 164
  • [27] Study on improvement of fatigue strength at welded joints in bridges by new functional structural steel plates against fatigue failure
    Sumitomo Metal Industries, Ltd., Corporate R and D Laboratories
    不详
    不详
    不详
    Weld. World, 2007, SPEC. ISS. (215-224):
  • [28] Applicability of low transformation temperature welding consumables to increase fatigue strength of welded high strength steels
    Harati, Ebrahim
    Karlsson, Leif
    Svensson, Lars-Erik
    Dalaei, Kamellia
    INTERNATIONAL JOURNAL OF FATIGUE, 2017, 97 : 39 - 47
  • [29] Repair of fatigue cracks initiated around box weldes by using low-transformation temperature welding material
    Suzuki, Naoyuki
    Ohta, Akihiko
    Maeda, Yoshio
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2003, 21 (01): : 62 - 67
  • [30] Extension of fatigue life by additional welds around box welds using low transformation temperature welding material
    Ohta, A
    Suzuki, N
    Maeda, Y
    HIGH PERFORMANCE MATERIALS IN BRIDGES, 2003, : 219 - 226
12345