Development of new technique for continuous molten steel temperature measurement

被引：0

作者：

Sugiura, Masato ^{[1
]}

Yamazaki, Tsuyoshi ^{[2
]}

Nakao, Ryuji ^{[3
]}

Tanaka, Tomoaki ^{[4
]}

Nagata, Seiji ^{[1
]}

Kumazawa, Hiroyuki ^{[5
]}

Tsubota, Eiji ^{[5
]}

Nagai, Wataru ^{[5
]}

机构：

[1] Environment and Process Technology Center

[2] Hirohata R and D Lab

[3] Hikari R and D Lab

[4] Hikari Works

[5] Hirohata Works

来源：

Nippon Steel Technical Report | 2004年 / 89期

关键词：

Costs - Furnaces - Industrial plants - Middleware - Nozzles - Radiation - Steel - Technology transfer - Thermocouples;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

In the production of steel in a smelting furnace such as a converter, to measure molten steel temperature is extremely important to both process control and metallurgical quality. Generally, sublance method is only utilized for direct measurement of the steel temperature. A disposable thermocouple probe attached at the tip of the sublance is intermittently inserted the steel. Nippon Steel developed a new continuous temperature measurement technique using 2-dimensional radiation thermometry. The molten steel is observed through a tuyere nozzle at the bottom of the furnace. Experiments were carried out on a laboratory steel bath, a stainless steel converter AOD and a scrap melting furnace. Efficiency of this continuous thermometry was clarified.

引用

页码：23 / 27

共 50 条

[31] A NEW TECHNIQUE FOR CONTINUOUS MEASUREMENT OF THE HEAT OF FERMENTATION
LUONG, JHT
VOLESKY, B
EUROPEAN JOURNAL OF APPLIED MICROBIOLOGY AND BIOTECHNOLOGY, 1982, 16 (01): : 28 - 34
[32] A New Method for Sensing Pouring Temperature of Molten Steel in Tundish
Xie, Qixian
Zhang, Jiu
Mao, Zhingzhong
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2021, 70
[33] A DEVELOPMENT OF CONTINUOUS MEASUREMENT OF SOLUBLE OXYGEN IN STEEL .1. CONTINUOUS MEASUREMENT OF SOLUBLE OXYGEN IN STEEL IN A CC TUNDISH
SHIROTA, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (04): : S206 - S206
[34] Characteristics of molten steel jet flow in a continuous casting mold with electromagnetic brake technique
Okazawa, K
Sawada, I
Harada, H
Toh, T
Takeuchi, E
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1998, 84 (07): : 490 - 495
[35] HEAT-BALANCE ANALYSIS BY MEANS OF CONTINUOUS MEASUREMENT OF MOLTEN STEEL TEMPERATURE IN TUNDISH .2. INFLUENCE OF TUNDISH TEMPERATURE ON QUALITY OF PRODUCTS IN BLOOM CONTINUOUS-CASTING
MIZUTANI, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (04): : S251 - S251
[36] HEAT-BALANCE ANALYSIS BY MEANS OF CONTINUOUS MEASUREMENT OF MOLTEN STEEL TEMPERATURE IN TUNDISH .1. INFLUENCE OF TUNDISH TEMPERATURE ON QUALITY OF PRODUCTS IN BLOOM CONTINUOUS-CASTING
EGUCHI, J
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : S984 - S984
[37] New development to the pneumatic measurement technique
Deng, SX
Du, Q
Zhao, QC
Zhang, H
PROCEEDINGS OF THE FIRST INTERNATIONAL SYMPOSIUM ON INSTRUMENTATION SCIENCE AND TECHNOLOGY, 1999, : 296 - 300
[38] Measurement and control of temperature of liquid steel during continuous casting
Zhao, Laisheng
Zhang, Guangjun
Fang, Yujie
Teshugang/Special Steel, 19 (05): : 47 - 49
[39] THERMOCOUPLE FOR CONTINUOUS TEMPERATURE-MEASUREMENT OF LIQUID STEEL (E)
GRUZIN, VG
KONDRASHIN, VM
DANISHEVSKII, SK
MEASUREMENT TECHNIQUES, 1972, 15 (12) : 1876 - 1877
[40] CONTINUOUS MEASUREMENT OF STEEL TEMPERATURE IN THE LADLE DURING TEEMING.
Putilov, N.T.
Glazyrin, B.S.
Kochegarov, V.G.
Ryabov, V.V.
Krylova, M.V.
Zagudailov, Yu.V.
Oblasov, G.A.
Kozlov, V.N.
Metallurgist, 1984, 28 (12) : 426 - 428

← 1 2 3 4 5 →