DIENE TERMONOMER TYPE AND EPDM PROPERTIES.

被引：0
|
作者：
Baranwal, K.C.
Lindsay, G.A.
机构：
来源：
Rubber Chemistry and Technology | 1972年 / 45卷 / 05期
关键词：
BUTADIENE; -; POLYMERIZATION; POLYOLEFINS; TERPOLYMERS;
D O I：
10.5254/1.3544742
中图分类号：
学科分类号：
摘要：
Effects of type of diene termonomer on thermal stability and aging of EPDM terpolymers were investigated. Five different polymers using ethylidene norbornene (ENB), butadiene (BD), dicyclopentadiene (DCPD), methyltetrahydroindene (MTHI), and 1,4-hexadiene (HD) as termonomers were made at equimolar unsaturation. In both gum and filled vulcanizates ENB-EPDM is the fastest curing. In gum stocks HD-EPDM is the slowest curing, but is faster than DCPD-EPDM in filled stocks. At 350 F aging temperature, both ENB and HD polymers have 65 percent mopnosulfidic crosslinks and about the same energy-to-break values (E//b). Thermogravimetric analysis in N//2 shows that these vulcanizates decompose in 800-935 F temperature range.
引用
收藏
页码：1334 / 1347
相关论文
共 50 条
  • [21] Curing Characteristics and Tear Properties of Bentonite Filled Ethylene Propylene Diene (EPDM) Rubber Composites
    Mat, Nurus Sakinah Che
    Ismail, Hanafi
    Othman, Nadras
    5TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MINERALS AND ENVIRONMENT (RAMM) & 2ND INTERNATIONAL POSTGRADUATE CONFERENCE ON MATERIALS, MINERAL AND POLYMER (MAMIP), 2016, 19 : 394 - 400
  • [22] Measurement and correlation of sorption and transport properties of ethylene-propylene-diene monomer (EPDM) elastomers
    Rutherford, SW
    Kurtz, RE
    Smith, MG
    Honnell, KG
    Coons, JE
    JOURNAL OF MEMBRANE SCIENCE, 2005, 263 (1-2) : 57 - 65
  • [23] Crosslinking of ethylene propylene diene monomer (EPDM) by buckminsterfullerene
    A. Jiang
    G. R. Hamed
    Polymer Bulletin, 1997, 38 : 545 - 549
  • [24] Ablation model of ethylene propylene diene monomer (EPDM)
    He, Hongqing
    Yan, Hong
    Tuijin Jishu/Journal of Propulsion Technology, 1999, 20 (04): : 36 - 39
  • [25] Combustion of Ethylene Propylene Diene Rubber(EPDM) and PVC
    Wang Lei
    Li Rundong
    Li Yanlong
    ADVANCES IN CHEMISTRY RESEARCH II, PTS 1-3, 2012, 554-556 : 210 - 213
  • [26] Influence of accelerator type on properties of NR/EPDM blends
    Sae-oui, Pongdhorn
    Sirisinha, Chakrit
    Thepsuwan, Uthai
    Thapthong, Phuchong
    POLYMER TESTING, 2007, 26 (08) : 1062 - 1067
  • [27] Influence of maleic anhydride grafted ethylene propylene diene monomer (MAH-g-EPDM) on the properties of EPDM nanocomposites reinforced by halloysite nanotubes
    Pasbakhsh, Pooria
    Ismail, H.
    Fauzi, M. N. Ahmad
    Abu Bakar, A.
    POLYMER TESTING, 2009, 28 (05) : 548 - 559
  • [28] Development of a New Type of Iron Powder with Unusual Properties.
    Grebe, K.
    de Haas, H.
    Dautzenberg, N.
    Zeitschrift fuer Werkstofftechnik/Materials Technology and Testing, 1986, 17 (07): : 247 - 251
  • [29] Crosslinking of ethylene propylene diene monomer (EPDM) by buckminsterfullerene
    Jiang, A
    Hamed, GR
    POLYMER BULLETIN, 1997, 38 (05) : 545 - 549
  • [30] Effects of Ethylene Propylene Diene Monomer (EPDM)-Based Polar Macromolecular Compatibilizers on the Low-Temperature Properties of Fluoroelastomer/EPDM Rubber Blends
    Liu, Gen
    Du, Faxin
    Yao, Zhangjun
    Li, Guangzhao
    Kuang, Wen
    Zhu, Chongyu
    Liu, Yi
    Chen, Honglin
    Wang, Fumei
    Zhou, Ce
    Wei, Xueli
    Wang, Wenyan
    Han, Rui
    MOLECULES, 2024, 29 (23):
12345