Assessment of RELAP5/MOD3.1 for direct-contact condensation in the core makeup tank of the CARR passive reactor

被引：5

作者：

Lee, Sang Il ^{[1
]}

No, Hee Cheon ^{[1
]}

机构：

[1] Korea Advanced Inst of Science and, Technology, Taejon, Korea, Republic of

来源：

| 1997年 / Elsevier Science Ltd, Oxford, United Kingdom卷 / 24期

关键词：

Bubbles (in fluids) - Computer aided analysis - Computer software - Computer software selection and evaluation - Condensation - Heat transfer coefficients - Interfaces (materials) - Jets - Reactor cores - Subsonic flow;

D O I：

10.1016/S0306-4549(96)00086-2

中图分类号：

学科分类号：

摘要：

The objective of the present work is to assess the analysis capability of thermo-hydraulic code on the direct contact condensation in the core makeup tank (CMT) of passive high-pressure injection system (PHPIS) in the CARR Passive Reactor (CP-1300). RELAP5/MOD3.1 is chosen to evaluate the code predictability on the direct contact condensation in the CMT. It is found that the predictions of MOD3.1 are in better agreement with the experimental data than those of MOD3.0. From the nodalization study of the test section, the 1-node model shows better agreement with the experimental data than the multi-node models. RELAP5/MOD3.1 identifies the flow regime of the test section as vertical stratification. However, the flow regime observed in the experiment is the subsonic jet with the bubble having the vertical cone shape. To accurately predict the direct contact condensation in the CMT with RELAP5/MOD3.1, it is essential that a new set of the interfacial heat transfer coefficients and a new flow regime map for direct contact condensation in the CMT be developed.

引用

共 24 条

[11] Direct-contact condensation heat transfer model in RELAP5/MOD3.2 with/without noncondensable gases for horizontally stratified flow
Choi, KY
Chung, HJ
No, HC
NUCLEAR ENGINEERING AND DESIGN, 2002, 211 (2-3) : 139 - 151
[12] Analysis of steam generator loss-of-feedwater experiments with APROS and RELAP5/MOD3.1 computer codes
Virtanen, E
Haapalehto, T
Kouhia, J
NUCLEAR ENGINEERING AND DESIGN, 1997, 177 (1-3) : 147 - 153
[13] Assessment and improvement of condensation models in RELAP5/MOD3.2
Choi, KY
Park, HS
Kim, SJ
No, HC
Bang, YS
NUCLEAR TECHNOLOGY, 1998, 124 (02) : 103 - 117
[14] RELAP5 validation for core makeup tank analysis based on separate effect tests
Zhu, Mingzhang
Chang, Huajian
Wang, Han
Zhu, Qingzi
Liu, Yixuan
NUCLEAR ENGINEERING AND DESIGN, 2022, 398
[15] Assessment of RELAP5/MOD3.3 condensation models for the tube bundle condensation in the PCCS of ESBWR
Zhou, W.
Wolf, B.
Revankar, S.
NUCLEAR ENGINEERING AND DESIGN, 2013, 264 : 111 - 118
[16] An assessment of RELAP5/Mod3.3 condensation model for high Reynolds number flows
Aglar, Fahri
PROGRESS IN NUCLEAR ENERGY, 2010, 52 (08) : 759 - 766
[17] Condensation experiment in the presence of noncondensables in a vertical tube of a passive containment cooling system and its assessment with RELAP5/MOD3.2
Park, Hyun Sik
No, Hee Cheon
Nuclear Technology, 127 (02): : 160 - 169
[18] A condensation experiment in the presence of noncondensables in a vertical tube of a passive containment cooling system and its assessment with RELAP5/MOD3.2
Park, HS
No, HC
NUCLEAR TECHNOLOGY, 1999, 127 (02) : 160 - 169
[19] SIMULATION OF THE IAEAS 4TH STANDARD PROBLEM EXERCISE SMALL-BREAK LOSS-OF-COOLANT ACCIDENT USING RELAP5 MOD3.1
CEBULL, PP
HASSAN, YA
NUCLEAR TECHNOLOGY, 1995, 109 (03) : 327 - 337
[20] A preliminary study on direct-contact condensation between water and vapor in a suppression tank for fusion reactor safety
Takase, K
FUSION TECHNOLOGY, 2001, 39 (02): : 1056 - 1060

← 1 2 3 →