An experimental study on the grinding of alumina with a monolayer brazed diamond wheel

被引：0
|
作者：
Chen, Jianyi [1 ]
Huang, Hui [1 ]
Xu, Xipeng [1 ]
机构：
[1] Key Research Lab for Stone Machining, Huaqiao University, Quanzhou, Fujian 362021, China
来源：
International Journal of Advanced Manufacturing Technology | 2009年 / 41卷 / 1-2期
关键词：
A monolayer diamond grinding wheel was fabricated by brazing in vacuum. The wheel was then used to grind alumina at three different grinding speeds. The horizontal and vertical grinding forces; and the grinding temperatures were measured during grinding. SEM observations were made for the ground workpiece surfaces. The influences of the peripheral wheel speed on the grinding forces; specific grinding energy and grinding temperatures were analyzed under different combinations of depth of cut and workpiece velocity. The dependence of the average grinding force per grain and specific grinding energy on the maximum undeformed chip thickness was discussed respectively. It was found that an increase in the peripheral wheel speed reduced grinding force; but increased force ratio; specific grinding energy; and grinding temperature. © 2008 Springer-Verlag London Limited;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：16 / 23
相关论文
共 50 条
  • [21] An experimental investigation of temperatures and energy partition in grinding of cemented carbide with a brazed diamond wheel
    Zhan, You Ji
    Xu, Xi Peng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 61 (1-4): : 117 - 125
  • [22] An experimental investigation of temperatures and energy partition in grinding of cemented carbide with a brazed diamond wheel
    You Ji Zhan
    Xi Peng Xu
    The International Journal of Advanced Manufacturing Technology, 2012, 61 : 117 - 125
  • [23] Surface/Subsurface Damage of Yttria Partially Stabilized Zirconia in Grinding using Monolayer Brazed Diamond Wheel
    Li, Shusheng
    Xu, Jiuhua
    Fu, Yucan
    Su, Honghua
    MACHINING AND ADVANCED MANUFACTURING TECHNOLOGY X, 2010, 431-432 : 326 - 329
  • [24] The Effect of a Rotating Heat Pipe in a Brazed Diamond Grinding Wheel on Grinding Temperature
    Ma, Ke
    Xu, Hongjun
    Fu, Yucan
    ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XV, 2009, 416 : 274 - 278
  • [25] Grinding characteristics of aluminium alloy 4032 with a brazed diamond wheel
    Huang, Guoqin
    Yu, Kaifeng
    Zhang, Meiqin
    Guo, Hua
    Xu, Xipeng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (9-12): : 4573 - 4581
  • [26] Crack characteristics of pulsed laser brazed diamond grinding wheel
    Li, Shichun
    Yan, Huijun
    Xiao, Gang
    He, Qi
    Li, Junzhe
    Zou, Mengcen
    Yang, Qinwen
    OPTICS AND LASER TECHNOLOGY, 2025, 181
  • [27] FORMING OF A GRINDING WHEEL USING A DRESSER WITH BRAZED DIAMOND FILM
    MURAKAWA, M
    TAKEUCHI, S
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 140 : 759 - 763
  • [28] Grinding characteristics of aluminium alloy 4032 with a brazed diamond wheel
    Guoqin Huang
    Kaifeng Yu
    Meiqin Zhang
    Hua Guo
    Xipeng Xu
    The International Journal of Advanced Manufacturing Technology, 2018, 95 : 4573 - 4581
  • [29] Wear of a Brazed Diamond Grinding Wheel with Diamond Grits Covered with Brazing Alloy
    Huang, Guoqin
    Chen, Hejie
    Huang, Hui
    Xu, Xipeng
    ADVANCES IN ABRASIVE TECHNOLOGY XII, 2009, 76-78 : 125 - 130
  • [30] Experimental research on performance of monolayer brazed diamond wheel through a new precise dressing method—plate wheel dressing
    Honghua Su
    Jianbo Dai
    Wenfeng Ding
    Kun Zhang
    Wang Xu
    The International Journal of Advanced Manufacturing Technology, 2016, 87 : 3249 - 3259
12345