Effect of dedolomitization on the physico-mechanical properties of mortar - Comparative studies

被引:0
|
作者
Babińska, Joanna [1 ]
机构
[1] Instytut Techniki Budowlanej, ul. Filtrowa 1, 00-611 Warszawa, Poland
关键词
Alkali reactivity - Carbonate aggregates - Chemical compositions - Comparative studies - Dedolomitization - Dolomitic limestone - Physical and mechanical properties - Physicomechanical properties;
D O I
暂无
中图分类号
学科分类号
摘要
This paper presents research carried out on carbonate aggregate - on three dolomite aggregates, one dolomitic limestone and one limestone - reference. Their physical and mechanical properties, structure and chemical composition were determined, and then made from them a samples of mortar and alkali reactivity tests were performed according to the AAR-2 method (developed by RILEM), keeping the reference samples in water. On the samples after the alkali-reactivity test and on the reference samples the comparative studies were performed, including compressive strength, porosity, phase composition by X-ray diffraction and thermal analysis. Based on the results of tests it can be said that with more advanced dedolomitization reaction, the porosity of mortar and a decrease in compressive strength after testing is less.
引用
收藏
页码:3 / 13
相关论文
共 50 条
  • [31] The effect of weathering on the flow, microstructure and physico-mechanical properties of ABS
    Department of Applied Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz-5166616471, Iran
    不详
    Iran Polym J Eng Ed, 2009, 9 (713-722):
  • [32] Effect of the combination of biobeating and NFC on the physico-mechanical properties of paper
    I. González
    F. Vilaseca
    M. Alcalá
    M. A. Pèlach
    S. Boufi
    P. Mutjé
    Cellulose, 2013, 20 : 1425 - 1435
  • [33] Effect of Curing Time on Physico-mechanical Properties on Dental Composite
    Gupta, Mayuri
    Tyagi, A. K.
    Raula, Manoj
    JOURNAL OF POLYMER & COMPOSITES, 2022, 10 (03) : 36 - 47
  • [34] Effect of the combination of biobeating and NFC on the physico-mechanical properties of paper
    Gonzalez, I.
    Vilaseca, F.
    Alcala, M.
    Pelach, M. A.
    Boufi, S.
    Mutje, P.
    CELLULOSE, 2013, 20 (03) : 1425 - 1435
  • [35] Comparative studies of some physico-mechanical properties of alkali and diazonium salts-treated jute fiber
    Kabir, MA
    Ali, MU
    Huque, MM
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2003, 42 (05) : 935 - 946
  • [36] Comparative studies on physico-mechanical properties of composite materials of low density polyethylene and raw/calcined kaolin
    Mallik, Amit
    Barik, Anil K.
    Pal, Biswajit
    JOURNAL OF ASIAN CERAMIC SOCIETIES, 2015, 3 (02) : 212 - 216
  • [37] Studies on the morphology and physico-mechanical properties of NBR/PVC hybrid nanocomposites
    Subramanian, N.
    Senthilvel, K.
    Prabu, B.
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 2810 - 2816
  • [39] The Effect of Sodium and Magnesium Sulfate on Physico-Mechanical and Microstructural Properties of Kaolin and Ceramic Powder-Based Geopolymer Mortar
    Kaya, Mehmet
    Koksal, Fuat
    Nodehi, Mehrab
    Bayram, Muhammed
    Gencel, Osman
    Ozbakkaloglu, Togay
    SUSTAINABILITY, 2022, 14 (20)
  • [40] Iron oxide nanoparticle incorporated cement mortar composite: correlation between physico-chemical and physico-mechanical properties
    Kiamahalleh, Mohammad Valizadeh
    Alishah, Abbas
    Yousefi, Fereshteh
    Astani, Saeid Hojjati
    Gholampour, Aliakbar
    Kiamahalleh, Meisam Valizadeh
    MATERIALS ADVANCES, 2020, 1 (06): : 1835 - 1840