Heat Transfer Mechanism and Convective Heat Transfer Coefficient Model of Cryogenic Air Minimum Quantity Lubrication Grinding Titanium Alloy

被引：3
|
作者：
Liu M. [1 ]
Li C. [1 ]
Zhang Y. [1 ]
Yang M. [1 ]
Cui X. [1 ]
Li B. [1 ]
Gao T. [1 ]
Wang D. [2 ]
An Q. [3 ]
机构：
[1] School of Mechanical and Automobile Engineering, Qingdao University of Technology, Qingdao
[2] School of Air Transportation, Shanghai University of Engineering Science, Shanghai
[3] School of Mechanical and Power Engineering, Shanghai Jiao Tong University, Shanghai
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2023年 / 59卷 / 23期
关键词：
cryogenic air; grinding; heat transfer mechanism; minimum quantity lubrication(MQL); titanium alloy;
D O I：
10.3901/JME.2023.23.343
中图分类号：
学科分类号：
摘要：
Thermal damage of workpiece surface in titanium alloy grinding has become an urgent technical problem. The green clean minimum quantity lubrication technology has been applied to auxiliary grinding of titanium alloy, but it still has the defects of insufficient heat dissipation ability and limited lubrication antifriction ability. Using cryogenic air instead of normal temperature air to carry trace lubricating oil can significantly improve the heat transfer and lubrication performance of oil film in grinding zone. However, some scientific problems such as liquid film heat transfer law, workpiece surface temperature field distribution and evolution law of cryogenic lubricating oil physical characteristics still need to be revealed. Based on this, the evolution law of low temperature physical characteristics of lubricant is studied, and the quantitative mapping relationship between cold air temperature and physical parameters of lubricant is established. The heat transfer law of liquid film on workpiece interface of grinding wheel is analyzed and the theoretical model of heat transfer of liquid film in grinding zone is established. Furthermore, the model of convective heat transfer coefficient of lubricant under different cold wind conditions is established. The convective heat transfer coefficient of liquid film and the heat transfer performance of grinding titanium alloy assisted by cryogenic air minimum quantity lubrication are verified. The results show that the theoretical value of convective heat transfer coefficient is in good agreement with the measured value, and the error is 8.5%. The variation trend of the workpiece surface temperature is consistent with that of the theoretical value, when the cryogenic air temperature is −10 ℃. when the grinding depth is 30 μm and the cryogenic air temperature is −40 ℃, the error is 7.7%. The calculation accuracy meets the requirement. The results provide technical support for improving the surface integrity of titanium alloy grinding with cryogenic air minimum quantity lubrication. © 2023 Chinese Mechanical Engineering Society. All rights reserved.
引用
收藏
页码：343 / 357
页数：14
相关论文
共 43 条
  • [21] ZHANG J C, WU W T, LI C H, Et al., Convective heat transfer coefficient model under nanofluid minimum quantity lubrication coupled with cryogenic air grinding Ti-6Al-4V[J], International Journal of Precision Engineering and Manufacturing-Green Technology, 8, 4, pp. 1113-1135, (2020)
  • [22] CAI Zhongwei, SUN Yuli, XU Pengchong, Et al., Research progress of green grinding technology[J], Machine Building and Automation, 51, 6, pp. 1-5, (2022)
  • [23] ZHANG Gaofeng, LI Jingtao, WANG Zhigang, Et al., Experimental study on Nano-CMQL grinding of bearing steels[J], China Mechanical Engineering, 30, 19, pp. 2342-2348, (2019)
  • [24] THORNLEY A, WANG Y C, WANG C，, Et al., Optimizing the Mo concentration in low viscosity fully formulated oils[J], Tribology International, 168, (2022)
  • [25] LIU M Z, LI C H, ZHANG Y B, Et al., Cryogenic minimum quantity lubrication machining ： from mechanism to application[J], Frontiers of Mechanical Engineering, 16, 4, pp. 649-697, (2021)
  • [26] ZHANG Qiang, Modeling simulation and experimental study on effective flow rate of grinding fluid, (2023)
  • [27] LIU M Z, LI C H, ZHANG Y B, Et al., Analysis of grinding mechanics and improved grinding force model based on randomized grain geometric characteristics[J], Chinese Journal of Aeronautics, 36, 7, pp. 160-193, (2023)
  • [28] AZAMI A, SALAHSHOURNEJAD Z, SHAKOURI E, Et al., Influence of nano-minimum quantity lubrication with MoS<sub>2</sub> and CuO nanoparticles on cutting forces and surface roughness during grinding of AISI D2 steel[J], Journal of Manufacturing Processes, 87, pp. 209-220, (2023)
  • [29] JUNG I S, LEE J S., Effects of orientation sngles on film cooling over a flat plate：Boundary layer temperature distributions and adiabatic film cooling effectiveness[J], Journal of turbomachinery, 122, 1, pp. 153-160, (2000)
  • [30] MOSTAFAVI A, JAIN A., Theoretical analysis of unsteady convective heat transfer from a flat plate with time-varying and spatially-varying temperature distribution[J], International Journal of Heat and Mass Transfer, 183, (2022)
12345