Heat Transfer Mechanism and Convective Heat Transfer Coefficient Model of Cryogenic Air Minimum Quantity Lubrication Grinding Titanium Alloy

被引：3
|
作者：
Liu M. [1 ]
Li C. [1 ]
Zhang Y. [1 ]
Yang M. [1 ]
Cui X. [1 ]
Li B. [1 ]
Gao T. [1 ]
Wang D. [2 ]
An Q. [3 ]
机构：
[1] School of Mechanical and Automobile Engineering, Qingdao University of Technology, Qingdao
[2] School of Air Transportation, Shanghai University of Engineering Science, Shanghai
[3] School of Mechanical and Power Engineering, Shanghai Jiao Tong University, Shanghai
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2023年 / 59卷 / 23期
关键词：
cryogenic air; grinding; heat transfer mechanism; minimum quantity lubrication(MQL); titanium alloy;
D O I：
10.3901/JME.2023.23.343
中图分类号：
学科分类号：
摘要：
Thermal damage of workpiece surface in titanium alloy grinding has become an urgent technical problem. The green clean minimum quantity lubrication technology has been applied to auxiliary grinding of titanium alloy, but it still has the defects of insufficient heat dissipation ability and limited lubrication antifriction ability. Using cryogenic air instead of normal temperature air to carry trace lubricating oil can significantly improve the heat transfer and lubrication performance of oil film in grinding zone. However, some scientific problems such as liquid film heat transfer law, workpiece surface temperature field distribution and evolution law of cryogenic lubricating oil physical characteristics still need to be revealed. Based on this, the evolution law of low temperature physical characteristics of lubricant is studied, and the quantitative mapping relationship between cold air temperature and physical parameters of lubricant is established. The heat transfer law of liquid film on workpiece interface of grinding wheel is analyzed and the theoretical model of heat transfer of liquid film in grinding zone is established. Furthermore, the model of convective heat transfer coefficient of lubricant under different cold wind conditions is established. The convective heat transfer coefficient of liquid film and the heat transfer performance of grinding titanium alloy assisted by cryogenic air minimum quantity lubrication are verified. The results show that the theoretical value of convective heat transfer coefficient is in good agreement with the measured value, and the error is 8.5%. The variation trend of the workpiece surface temperature is consistent with that of the theoretical value, when the cryogenic air temperature is −10 ℃. when the grinding depth is 30 μm and the cryogenic air temperature is −40 ℃, the error is 7.7%. The calculation accuracy meets the requirement. The results provide technical support for improving the surface integrity of titanium alloy grinding with cryogenic air minimum quantity lubrication. © 2023 Chinese Mechanical Engineering Society. All rights reserved.
引用
收藏
页码：343 / 357
页数：14
相关论文
共 43 条
  • [1] WANG Xiaoming, ZHANG Jianchao, WANG Xuping, Et al., Temperature field model and verification of titanium alloy grinding under different cooling conditions[J], China Mechanical Engineering, 32, 5, pp. 572-578, (2021)
  • [2] GAJRANI K K, SUVIN P S, KAILAS S V, Et al., Hard machining performance of indigenously developed green cutting fluid using flood cooling and minimum quantity cutting fluid[J], Journal of Cleaner Production, 206, pp. 108-123, (2019)
  • [3] YUAN Songmei, ZHU Guangyuan, WANG Li, Recent progress on lubricant characteristics of minimum quantity lubrication (MQL) technology in green cutting[J], Journal of Mechanical Engineering, 53, 17, pp. 131-140, (2017)
  • [4] YANG Jianzhang, WANG Chengyong, YUAN Yaohui, Et al., State-of-the-art on MQL synergistic technologies and their applications[J], China Mechanical Engineering, 33, 5, pp. 506-528, (2022)
  • [5] WANG Xiaoming, LI Changhe, ZHANG Yanbin, Et al., Research progress on key technology of enabled atomization and supply system of Minimum Quantity Lubrication[J], Surface Technology, 51, 9, pp. 1-14, (2022)
  • [6] LIU Mingzheng, LI Changhe, CAO Huajun, Et al., Research progresses and applications of CMQL machining technology[J], China Mechanical Engineering, 33, 5, pp. 529-550, (2022)
  • [7] YANG Guang, Application of low temperature cold air with micro lubrication in gearing shaping, MW Metal Cutting, 2022, 7, pp. 58-62
  • [8] XU Jiuhua, Research progress of cutting or grinding technology for titanium alloy[J], Diamond and Abrasives Engineering, 40, 5, pp. 1-4, (2020)
  • [9] DANG J Q, ZHANG H, AN Q L, Et al., On the microstructural evolution pattern of 300 M steel subjected to surface cryogenic grinding treatment[J], Journal of Manufacturing Processes, 68, pp. 169-185, (2021)
  • [10] ZAMIRUDDIN N, SANI A, ROSLI N., Oil viscosity effects on lubricant oil film behaviour under minimum quantity lubrication[J], IOP Conference Series：Materials Science and Engineering, 1092, 1, (2021)
12345