Remaining useful life prediction based on an integrated neural network

被引：0
|
作者：
Zhang Y.-F. [1 ]
Lu Z.-Q. [1 ]
机构：
[1] School of Mechanical Engineering, Tongji University, Shanghai
来源：
Gongcheng Kexue Xuebao/Chinese Journal of Engineering | 2020年 / 42卷 / 10期
关键词：
Deep learning; Ensemble learning; Kalman filter; Neural network; Remaining useful life prediction;
D O I：
10.13374/j.issn2095-9389.2019.10.10.005
中图分类号：
学科分类号：
摘要：
Unexpected failures and unscheduled maintenance activities of mechanical systems might incur considerable waste of resources and high investment costs. Thus, in recent years, prognostics and health management (PHM) has received a lot of attention because of its importance in maintenance cost reduction and machine fault prognostics. The remaining useful life (RUL) of machinery is defined as the length from the current time to the end of its useful life, which is the core technology of PHM. During the operation of machines and equipment, a large amount of data generated by different sensors in the system is collected using various methods. These data often characterize the health status of machinery to a certain extent. By applying the systematic approach to these data, valuable information for strategic decision-making can be obtained. However, traditional machine learning algorithms are usually not efficient enough to handle the complex and nonlinear characteristics of the system and deal with big data. With the rapid development of modern computational hardware and theory, deep learning algorithms show unique advantages in characterizing the system complexity and processing big data. Because of the low-accuracy prediction of the RUL of machines or equipment, a neural network integrating the one-dimensional convolutional neural network (1D CNN) and the bidirectional long short-term memory (BD-LSTM) was proposed. To extract the features of the time series and generate more training samples, the sliding window algorithm was used to process the data and the Kalman filter was applied to denoise the data. Then, the dataset was standardized and the RUL labels were set. Instead of artificial feature extraction, this study used 1D CNN to extract features from the data and discarded the pooling layer of CNN. The extracted high-dimensional features were inputted into the BD-LSTM for regression prediction, and the neural network was integrated by bagging to predict the RUL. Finally, the effectiveness and superiority of the model compared with the machine or deep learning model were verified using the National Aeronautics and Space Administration dataset. Results showed that the proposed model can more accurately predict the RUL than the machine or deep learning model. Copyright ©2020 Chinese Journal of Engineering. All rights reserved.
引用
收藏
页码：1372 / 1380
页数：8
相关论文
共 26 条
  • [11] Mosallam A, Medjaher K, Zerhouni N., Data-driven prognostic method based on Bayesian approaches for direct remaining useful life prediction, J Intell Manuf, 27, 5, (2016)
  • [12] Khelif R, Chebel-Morello B, Malinowski S, Et al., Direct remaining useful life estimation based on support vector regression, IEEE Trans Ind Electron, 64, 3, (2017)
  • [13] Miao Q, Xie L, Cui H J, Et al., Remaining useful life prediction of lithium-ion battery with unscented particle filter technique, Microelectron Reliab, 53, 6, (2013)
  • [14] Tobon-Mejia D A, Medjaher K, Zerhouni N, Et al., A data-driven failure prognostics method based on mixture of Gaussians hidden Markov models, IEEE Trans Reliab, 61, 2, (2012)
  • [15] Li Z X, Wu D Z, Hu C, Et al., An ensemble learning-based prognostic approach with degradation-dependent weights for remaining useful life prediction, Reliab Eng Syst Saf, 184, (2019)
  • [16] Heimes F O., Recurrent neural networks for remaining useful life estimation, 2008 International Conference on Prognostics and Health Management, (2008)
  • [17] Babu G S, Zhao P L, Li X L., Deep convolutional neural network based regression approach for estimation of remaining useful life, International Conference on Database Systems for Advanced Applications, (2016)
  • [18] Yuan M, Wu Y T, Lin L., Fault diagnosis and remaining useful life estimation of aero engine using LSTM neural network, 2016 IEEE International Conference on Aircraft Utility Systems ( AUS ), (2016)
  • [19] Zhang Y Z, Xiong R, He H W, Et al., Long short-term memory recurrent neural network for remaining useful life prediction of lithium-ion batteries, IEEE Trans Veh Technol, 67, 7, (2018)
  • [20] Ordonez C, Lasheras F S, Roca-Pardinas J, Et al., A hybrid ARIMA-SVM model for the study of the remaining useful life of aircraft engines, J Comput Appl Math, 346, (2019)
123