Full-scale testing and analysis for blast-resistant design

被引：0

作者：

Maji, Arup K. ^{[1
]}

Brown, Jay P. ^{[2
]}

Urgessa, Girum S. ^{[3
]}

机构：

[1] Dept. of Civil Engineering, Univ. of New Mexico, Albuquerque, NM 87131, United States

[2] Strategic Technology, Zapata Engineering, 6302 Fairview Rd., Charlotte, NC 28210, United States

[3] Dept. of Civil, Environmental and Infrastructure Engineering, George Mason Univ., Mail Stop 6C1, 4400 University Dr., Fairfax, VA 22030, United States

来源：

Journal of Aerospace Engineering | 2008年 / 21卷 / 04期

关键词：

A full-scale blast test was conducted on a structure representing a mailroom; constructed with unreinforced masonry walls. The four walls were retrofitted with different quantities of glass fiber-reinforced polymers (GFRP) on the outside face to increase their resistance to the blast load. In addition; shotcrete was added to the inside face of the two long walls. The objective of this test was to validate a method of analysis that can be used to design effective retrofit techniques to contain blast loads. A blast load was produced by the detonation of a 0.91 kg (2 lb) equivalent TNT charge placed near the center of the room. Instrumentation on individual walls monitored the blast pressure and the consequent displacement and velocity of the walls. Although the walls sustained extensive internal damage and plastic deformation; the retrofit was able to withstand the blast load. It was observed through the postmortem analysis of the test that the stiffness of the walls is completely lost at an early stage and only membrane action of the GFRP provides structural resistance. © 2008 ASCE;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：217 / 225

共 50 条

[31] Evaluation and Design of Blast-Resistant Buildings at Refineries and Petrochemical Facilities
Summers, Paul B.
Li, Guzhao
Mu, Zonglei
AEI 2017: RESILIENCE OF THE INTEGRATED BUILDING, 2017, : 537 - 548
[32] Full-scale flexural strength testing for stone cladding design
Naggatz, Steven G.
Gerns, Edward A.
Journal of ASTM International, 2007, 4 (07):
[33] FUNDAMENTAL OF DYNAMICAL ANALYSIS OF THE BLAST-RESISTANT UNDERGROUND STRUCTURES
赵玉祥
宋熙太
钱尔旋
Applied Mathematics and Mechanics(English Edition), 1993, (05) : 407 - 415
[34] Poststrengthening of concrete slabs: Full-scale testing and design recommendations
Seim, W
Vasquez, A
Karbhari, V
Seible, F
JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 2003, 129 (06): : 743 - 752
[35] Full-scale flexural strength testing for stone cladding design
Naggatz, Steven G.
Gerns, Edward A.
DIMENSION STONE USE IN BUILDING CONSTRUCTION, 2007, 1499 : 3 - 10
[36] BLAST-RESISTANT CONTROL BUILDINGS
ROUZSKY, N
STRUCTURAL SAFETY, 1988, 5 (04) : 253 - 266
[37] Design, Fabrication, and Instrumentation of a Full-Scale Pavement Testing Box
Nimeri, M.
Nabizadeh, H.
Hajj, E. Y.
Siddharthan, R. V.
Elfass, S.
Piratheepan, M.
AIRFIELD AND HIGHWAY PAVEMENTS 2019: DESIGN, CONSTRUCTION, CONDITION EVALUATION, AND MANAGEMENT OF PAVEMENTS, 2019, : 131 - 142
[38] FULL-SCALE BLAST-FURNACE TRIALS
BOND, JA
SANDERSON, T
JOURNAL OF THE IRON AND STEEL INSTITUTE, 1951, 168 (01): : 24 - 39
[39] Blast mitigation by a full-scale concrete wall
Homae, Tomotaka
Matsumura, Tomoharu
Wakabayashi, Kunihiko
Nakayama, Yoshio
SCIENCE AND TECHNOLOGY OF ENERGETIC MATERIALS, 2008, 69 (3-4) : 92 - 97
[40] Blast-resistant design considerations for precast, prestressed concrete structures
Alaoui, Sanaa
Oswald, Charles
PCI JOURNAL, 2007, 52 (06): : 53 - 65

← 1 2 3 4 5 →