Composition and morphology of composite fouling by municipal secondary effluent on heat transfer surfaces

被引：0

作者：

Shi, Lin ^{[1
]}

Zan, Cheng ^{[1
]}

Yang, Wenyan ^{[2
]}

机构：

[1] Key Laboratory for Thermal Science and Power Engineering, Department of Thermal Engineering, Beijing 100084, China

[2] State Key Laboratory of Tribology, Tsinghua University, Beijing 100084, China

来源：

Qinghua Daxue Xuebao/Journal of Tsinghua University | 2009年 / 49卷 / 02期

关键词：

Effluents - Heat exchangers - Heat transfer - Microorganisms - Plates (structural components);

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Fouling caused by municipal secondary effluent in a plate heat exchanger was investigated for typical working conditions of heat pump heat exchangers. The experiments focused on the composition and morphology of the above fouling. The results show that the fouling by the municipal secondary effluent in the plate heat exchanger is a composite substance consisting mainly of biological products. Thus the fouling characteristics are closely related to the substances in the effluent. The surface structure of the fouling forms like a mesh and the microbes and extracellular polymeric substances capture inorganic suspended solids in the effluent. The inorganic suspended solid then becomes nodes for microorganism growth and reproduction. The experimental results provide essential information for the design of waste energy recovery from municipal secondary effluent.

引用

页码：236 / 239

共 50 条

[31] EFFECTIVENESS OF HYDRODYNAMIC METHODS FOR DIMINISHING FOULING ON HEAT-TRANSFER SURFACES
GLAGOLEV, VN
KOMENDROVSKII, YI
VERIGIN, AN
JOURNAL OF APPLIED CHEMISTRY OF THE USSR, 1991, 64 (06): : 1066 - 1070
[32] HEAT-TRANSFER FROM FINNED SURFACES WITH A UNIFORM FOULING DEPOSIT
MIDDIS, J
MULLERSTEINHAGEN, HM
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1991, 69 (03): : 755 - 760
[33] Comparing Calcium Sulfate Fouling on Polymeric and Metal Heat Transfer Surfaces
Pelz, Philipp
Schulz, Julian
Mavaddat, Poorya
Meyer, Conrad
Jasch, Katharina
Scholl, Stephan
von Harbou, Erik
Bart, Hans-Joerg
CHEMIE INGENIEUR TECHNIK, 2024, 96 (10) : 1385 - 1393
[34] NEW INVESTIGATIONS ON FOULING OF HEAT-TRANSFER SURFACES BY SEDIMENTATION AND CRYSTALLIZATION
KRAUSE, S
CHEMIE INGENIEUR TECHNIK, 1986, 58 (02) : 146 - 147
[35] Molecular Dynamics Simulation of the Deposition Characteristics MgO Particles and Calcium Carbonate Composite Fouling on Copper Heat Transfer Surfaces
Sun J.
Cui X.
Xu Z.
Jia Y.
Wang J.
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2024, 44 (06): : 2310 - 2318
[36] Ozonation of Municipal Secondary Effluent; Removal of Hazardous Micropollutants and Related Changes of Organic Matter Composition
Domenjoud, Bruno
Cortes-Francisco, Nuria
Guastalli, Andrea R.
Caixach, Josep
Esplugas, Santiago
Baig, Sylvie
JOURNAL OF ADVANCED OXIDATION TECHNOLOGIES, 2011, 14 (01) : 138 - 146
[37] Innovative non-metal heat transfer surfaces to mitigate crystallization fouling
Al-Janabi, Abdullah
Malayeri, M. R.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2019, 138 : 384 - 392
[38] Comparison of different model solutions to simulate membrane fouling in the ultrafiltration of a secondary effluent from a municipal wastewater treatment plant
Tora-Grau, M.
Soler-Cabezas, J. L.
Vincent-Vela, M. C.
Mendoza-Roca, J. A.
Martinez-Francisco, F. J.
DESALINATION AND WATER TREATMENT, 2015, 55 (11) : 2924 - 2930
[39] Contributions of surface and pore deposition to (ir)reversible fouling during constant flux microfiltration of secondary municipal wastewater effluent
Gupta, Kunal
Chellam, Shankararaman
JOURNAL OF MEMBRANE SCIENCE, 2020, 610
[40] CFD modelling of CaCO3 crystallization fouling on heat transfer surfaces
Paakkonen, T. M.
Ojaniemi, U.
Pattikangas, T.
Manninen, M.
Muurinen, E.
Keiski, R. L.
Simonson, C. J.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 97 : 618 - 630

← 1 2 3 4 5 →