Influence of silicon addition on the phase composition of aluminum-matrix composite materials reinforced by silicon carbide particles

被引：0
|
作者：
Kurbatkina, E.I. [1 ]
Kosolapov, D.V. [1 ]
Balakirev, E.V. [1 ]
机构：
[1] Federal State Unitary Enterprise ʺAll-Russia Research Institute of Aviation Materialsʺ, State Scientific Center, 17 Radio Str., Moscow,105005, Russia
来源：
International Journal of Nanomechanics Science and Technology | 2015年 / 6卷 / 01期
关键词：
Aluminum alloys - Aluminum compounds - Particle reinforced composites - Phase diagrams - Silicon alloys;
D O I：
10.1615/NANOMECHANICSSCITECHNOLINTJ.V6.I1.50
中图分类号：
学科分类号：
摘要：
This article presents the analysis of the Al–Si–C phase diagram, as well as the isothermal and polythermal sections. The silicon concentration in the aluminum-matrix alloy, excluding the formation of aluminum carbide (Al4C3), is substantiated theoretically. In order to verify the calculations, experimental studies were conducted, which confirm that formation of aluminum carbide does not take place in samples containing silicon in an amount of ≥12% in the aluminum-matrix alloy. It is shown that the experimental values of the amount of the Al4C3 phase were significantly lower than the calculated ones, which is explained by a short time of contact between the aluminum melt and particles of silicon carbide. © 2014 by Begell House, Inc.
引用
收藏
页码：57 / 63
相关论文
共 50 条
  • [21] Galvanic corrosion and localized degradation of aluminum-matrix composites reinforced with silicon particulates
    Ding, Hongbo
    Hihara, L. H.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2008, 155 (05) : C226 - C233
  • [22] Effect of Graphite Addition on the Mechanical Properties of Stir cast Particulate Aluminum Metal Matrix Composite Reinforced with Alumina and silicon Carbide
    Swanand, Kulkarni R.
    Sonawane, P. M.
    Karnik, M. G.
    ADVANCED RESEARCH IN DESIGN, MANUFACTURING AND MATERIALS, 2014, 612 : 163 - +
  • [23] Study of silicon carbide-reinforced aluminum matrix composite brake rotor for motorcycle application
    Sadagopan P.
    Harish Karthi Natarajan
    Praveen Kumar J.
    The International Journal of Advanced Manufacturing Technology, 2018, 94 : 1461 - 1475
  • [24] Study of silicon carbide-reinforced aluminum matrix composite brake rotor for motorcycle application
    Sadagopan, P.
    Natarajan, Harish Karthi
    Kumar, Praveen J.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 94 (1-4): : 1461 - 1475
  • [25] Machinability of a silicon carbide reinforced aluminium metal matrix composite
    Lin, J.T.
    Bhattacharyya, D.
    Lane, C.
    Wear, 1995, 181-183 (02): : 883 - 888
  • [26] Influence of the Grit size of Silicon Carbide Particles on the Mechanical and Electrical Properties of Stir Casting Aluminum Matrix Composite Material
    A. O. Inegbenebor
    C. A. Bolu
    P. O. Babalola
    A. I. Inegbenebor
    Fayomi Ojo Sunday
    Silicon, 2016, 8 : 573 - 578
  • [27] Influence of the Grit size of Silicon Carbide Particles on the Mechanical and Electrical Properties of Stir Casting Aluminum Matrix Composite Material
    Inegbenebor, A. O.
    Bolu, C. A.
    Babalola, P. O.
    Inegbenebor, A. I.
    Fayomi, O. S. I.
    SILICON, 2016, 8 (04) : 573 - 578
  • [28] TOUGHENING OF SILICON-NITRIDE MATRIX COMPOSITES BY THE ADDITION OF BOTH SILICON-CARBIDE WHISKERS AND SILICON-CARBIDE PARTICLES
    KODAMA, H
    SUZUKI, T
    SAKAMOTO, H
    MIYOSHI, T
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1990, 73 (03) : 678 - 683
  • [29] Silicon carbide monofilament-reinforced silicon nitride or silicon carbide matrix composites
    Kodama, H., 1600, Pharmacotherapy Publications Inc. (72):
  • [30] Tribological and surface behavior of silicon carbide reinforced aluminum matrix nanocomposite
    Manivannan, I.
    Ranganathan, S.
    Gopalakannan, S.
    Suresh, S.
    Nagakarthigan, K.
    Jubendradass, R.
    SURFACES AND INTERFACES, 2017, 8 : 127 - 136
12345