Effect of rubber particle cavitation on the mechanical properties and deformation behavior of high-impact polystyrene

被引：0
|
作者：
Serpooshan, V. [1 ]
Zokaei, S. [1 ]
Bagheri, R. [1 ]
机构：
[1] Polymeric Materials Research Group, Department of Materials Science and Engineering, Sharif University of Technology, P.O. Box 11365-9466, Tehran, Iran
来源：
Journal of Applied Polymer Science | 2007年 / 104卷 / 02期
关键词：
Rubber particle cavitation has been the focus of many investigations because it dramatically affects the mechanical properties of polymeric blends. In this work; the effect of rubber particle cavitation on the mechanical behavior of high-impact polystyrene was studied. The extent of cavitation in rubber particles was varied via different thermal contraction/expansion cycles in the range of -100 to 23°C. Tensile; creep; and Charpy impact tests were conducted to evaluate the effects of the degree of cavitation on the general mechanical properties. The notch-tip damage zone and deformation micromechanisms were also investigated by a transmitted optical microscopy technique to reveal the effects of cavitation on toughness. The results of this investigation illustrate a close relationship between the degree of rubber particle cavitation and the mechanical performance of high-impact polystyrene. © 2007 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：1110 / 1117
相关论文
共 50 条
  • [31] MICROVOID FORMATION DURING DEFORMATION OF HIGH-IMPACT POLYSTYRENE
    STEGER, TR
    NIELSEN, LE
    JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 1978, 16 (04) : 613 - 625
  • [32] Influence of solvent contents on the rubber-phase particle size distribution of high-impact polystyrene
    Lee, S.J. (sjlee@mail.suwon.ac.kr), 1600, John Wiley and Sons Inc. (89):
  • [33] Influence of solvent contents on the rubber-phase particle size distribution of high-impact polystyrene
    Lee, SJ
    Jeoung, HG
    Ahn, KH
    JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 89 (13) : 3672 - 3679
  • [34] Mechanical deformation of high-impact polystyrene under uniaxial tension at various strain rates
    Kuboki, T
    Ben Jar, PY
    Takahashi, K
    Shinmura, T
    MACROMOLECULES, 2002, 35 (09) : 3584 - 3591
  • [35] The use of Nizhnekamskneftekhim butadiene rubber in high-impact polystyrene production
    Vaseneva, I.A.
    Boreiko, N.P.
    Trifonova, O.M.
    International Polymer Science and Technology, 2012, 39 (06) : 3 - 4
  • [36] RHEOLOGICAL PROPERTIES OF HIGH-IMPACT POLYSTYRENE MELTS
    TONG, PP
    DORMIER, EJ
    JOURNAL OF ELASTOMERS AND PLASTICS, 1986, 18 (01): : 24 - 34
  • [37] EFFECT OF GRAFTING ON RUBBER-PHASE OXIDATIVE ETCH RESISTANCE IN HIGH-IMPACT POLYSTYRENE
    HALL, RA
    JACOBY, P
    JOURNAL OF APPLIED POLYMER SCIENCE, 1979, 23 (05) : 1453 - 1460
  • [38] Morphology and mechanical properties of high-impact polystyrene/elastomer/magnesium hydroxide composites
    Chang, Suqin
    Xie, Tingxiu
    Yang, Guisheng
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 102 (06) : 5184 - 5190
  • [39] Miscibility and Mechanical Properties of High-Impact Polystyrene Blended with Poly(α-olefin) Grease
    Inomata, Katsuhiro
    Ogiso, Marika
    Kobayashi, Ayu
    Hasegawa, Hiroyasu
    Nagata, Kenji
    Sugimoto, Hideki
    Nakanishi, Eiji
    NIHON REOROJI GAKKAISHI, 2011, 39 (1-2) : 87 - 92
  • [40] EFFECTS OF EXTRUSION CONDITIONS ON THE ORIENTATION AND MECHANICAL-PROPERTIES OF HIGH-IMPACT POLYSTYRENE
    GAZTELUMENDI, M
    NAZABAL, J
    EUROPEAN POLYMER JOURNAL, 1986, 22 (01) : 79 - 81
12345