High-strain deformation of polyethylenes in plane-strain compression at elevated temperatures

被引：0

作者：

Lezak, E. ^{[1
]}

Bartczak, Z. ^{[1
]}

机构：

[1] Centre of Molecular Macromolecular Studies, Polish Academy of Sciences, Sienkiewicza 112, 90-363 Lodz, Poland

来源：

Journal of Applied Polymer Science | 2007年 / 105卷 / 01期

关键词：

The deformation and recovery behavior of several polyethylenes and ethylene-based copolymers with various molecular architectures and a broad range of molecular masses and molecular mass distributions was studied. Because of the differences in the molecular characteristic; this series exhibited a relatively broad range of crystallite sizes and crystallinity levels. The samples were subjected to high strain compression under plane-strain conditions at the elevated temperature of 80°C. The unloading of the compressed samples led to substantial nonelastic recovery of the strain. The stress-strain and recovery behavior was related to the molecular parameters. The results confirmed the common deformation scheme with four crossover points related to the activation of subsequent deformation mechanisms; as proposed by Strobl. Although the critical strains; related to the activation of deformation of the crystalline component; are invariant; the critical strain of the last point; which is related to the activation of chain disentanglement in the amorphous component; depends on the temperature of deformation. That critical strain decreases from 1.0 to approximately 0.8-0.9 as the temperature of deformation increases from room temperature to 80°C. This shift results from an increase in the chain mobility with increasing temperature; and this makes modification of the molecular network through chain disentanglements easier. © 2007 Wiley Periodicals; Inc;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：14 / 24

共 50 条

[41] PLANE-STRAIN COMPRESSION OF MAGNESIUM AND MAGNESIUM ALLOY CRYSTALS
KELLEY, EW
HOSFORD, WF
TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1968, 242 (01): : 5 - &
[42] On the use of a plane-strain model to solve generalized plane-strain problems
Hu, SF
Pagano, NJ
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 1997, 64 (01): : 236 - 238
[43] Shear fracture in sandstone under plane-strain compression
Labuz, JF
Riedel, JJ
Dai, ST
ENGINEERING FRACTURE MECHANICS, 2006, 73 (06) : 820 - 828
[44] Analysis of plane-strain rotational compression of rod by FEM
Technical Univ of Lublin, Lublin, Poland
J Mater Process Technol, 1-4 (549-554):
[45] STRESS AND DEFORMATION ANALYSIS OF PLANE-STRAIN ROLLING PROCESS
YARITA, I
MALLETT, RL
LEE, EH
STEEL RESEARCH, 1985, 56 (05): : 255 - 259
[46] TEXTURE EVOLUTION DURING PLANE-STRAIN DEFORMATION OF ALUMINUM
PANCHANADEESWARAN, S
FIELD, DP
ACTA METALLURGICA ET MATERIALIA, 1995, 43 (04): : 1683 - 1692
[47] Evolution of lamellar orientation and crystalline texture of various polyethylenes and ethylene-based copolymers in plane-strain compression
Bartczak, Z
Lezak, E
POLYMER, 2005, 46 (16) : 6050 - 6063
[48] Characterization of deformation field in plane-strain indentation of metals
Murthy, T. G.
Huang, C.
Chandrasekar, S.
JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2008, 41 (07)
[49] APPROXIMATE ANALYSIS FOR STUDYING THE PLANE-STRAIN DEFORMATION OF STRAIN RATE SENSITIVE MATERIALS
TOMITA, Y
SOWERBY, R
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1979, 21 (08) : 505 - 516
[50] DEFORMATION AND FAILURE AT ISOLATED HOLES IN PLANE-STRAIN TENSION
BOURCIER, RJ
SMELSER, RE
RICHMOND, O
KOSS, DA
JOURNAL OF METALS, 1982, 34 (08): : 16 - 16

← 1 2 3 4 5 →