Study on optimization of key parameters of thick hard roof cutting and retaining roadway in inclined coal seam

被引：0

作者：

Shi W. ^{[1
]}

Li Z. ^{[1
]}

Liu C. ^{[2
]}

Lyu Y. ^{[2
]}

Zhang H. ^{[2
]}

Yang T. ^{[3
]}

机构：

[1] School of Civil Engineering and Architecture, Shandong University of Science and Technology, Qingdao

[2] School of Energy and Mining Engineering, Shandong University of Science and Technology, Qingdao

[3] Otog Qianqi Great Wall No.6 Mining Co., Ltd., Erdos

来源：

Meitan Kexue Jishu/Coal Science and Technology (Peking) | 2024年 / 52卷 / 05期

关键词：

gob-side entry retaining; inclined coal seams; roof cutting and pressure relief; roof-cutting angle; roof-cutting height; thick and hard roof;

D O I：

10.12438/cst.2023-1627

中图分类号：

学科分类号：

摘要：

To address stress concentration in mining roadways, particularly in the inclined, thick, and hard roof, and lessen the impact of sudden overlying strata collapse, a comprehensive study was conducted on the 1301N transport roadway in No.6 Great Wall Mine. The research utilized various methods such as theoretical analysis, numerical simulation, and field monitoring to optimize the key parameters of roof cutting and roadway retaining, leading to improved control of the surrounding rock and reduced risk of impact disturbance. Firstly, based on field geological data, the theoretical minimum roof-cutting height and angle of the 1301N transportation gateway were calculated using the coefficient of rock crushing and swelling and masonry beam theory. Furthermore, in order to confirm and enhance the accuracy of the theoretical findings, we utilized PFC2D numerical software to create a model of the roof-cutting retaining roadway situated in the No.1301N working face. By employing the control variable approach, we studied the response characteristics of roof stress, displacement, and surrounding rock fabric tensor of the retaining roadway at various roof-cutting heights and angles. The analysis results indicate a logarithmic relationship between cutting height and pressure relief effect. The effect increases with height, but growth amplitude decreases. There is an “S” growth relationship between the roof-cutting angle and the pressure relief effect. The pressure relief effect first increases and then decreases with the increase of the roof-cutting height. The change law between pressure relief parameters and pressure relief effect reveals that there is an optimal value for the selection of the roof-cutting height and an optimal solution for the selection of the roof-cutting angle. Based on the results of theoretical analysis and numerical simulation, it is determined that the most suitable roof-cutting height is 13 m, and the optimal roof-cutting angle is 10°. The field monitoring shows that the control effect of the surrounding rock under the roof-cutting parameters is good, and the deformation of the surrounding rock of the retaining roadway is small. It can effectively meet the mining demand of the next working face and verifies the effectiveness of optimizing the roof-cutting parameters. This provides a theoretical basis and practical reference for the selection of the parameters of roof cutting and retaining roadway under similar geological conditions. © 2024 China Coal Society. All rights reserved.

引用

页码：11 / 24

页数：13

共 28 条

[21] WANG Jiong, LIU Yuxing, MA Xingen, Et al., Technology of roof cutting and entry retaining in fully-mechanized working face of Tashan Coal Mine[J], Coal Science and Technology, 47, 2, pp. 27-34, (2019)
[22] GUO Jingang, LI Yaohui, SHI Songhao, Et al., Self-forming roadway of roof cutting and surrounding rock control technology under thick and hard basic roof[J], Journal of China Coal Society, 46, 9, pp. 2853-2864, (2021)
[23] ZHANG Sheng, WANG Xiaolang, WU Ziqiang, Et al., Status analys-is of the key parameters of blasting borehole and the retaining effect for gob-side entry retaining by the way of roof cutting and pressure releasing[J], Journal of Henan Polytechnic Univesity （Natural Science）, 38, 6, pp. 1-9, (2019)
[24] WANG Fangtian, SHANG Junjian, ZHAO Bin, Et al., Surrounding rock structural characteristics and anchor-cable strengthened support technology of the gob-side entry retaining with roof cutting and pressure releasing[J], Chinese Journal of Rock Mechanics and Engineering, 40, 11, pp. 2296-2305, (2021)
[25] ZHENG Lijun, WANG Wen, ZHANG Guangjie, Study on the tech-nology of gob-side entry retaining by roof cutting to release pre-ssure in fully mechanized mining working face with high stress[J], Journal of Henan Polytechnic Univesity (Natural Science), 40, 6, pp. 43-53, (2021)
[26] SUN Guangjian, ZHANG Yang, CHANG Xiaoliang, Et al., Technology of partition support by cutting-roof pressure relief and constant resistance reinforcement for double-used roadway with deep excavation-induced damage zone[J], Journal of Mining and Strata Control Engineering, 4, 4, pp. 43-55, (2022)
[27] MASANOBU Oda, Fabric tensor for discontinuous geological mater-ials[J], Soils and Foundations, 22, 4, (1982)
[28] XU Xuhui, HE Fulian, LYU Kai, Et al., Research on reasonable cutting roof parameters of gob side entry retaining by roof cutting in thick and hard roof[J], Journal of China Coal Society, 48, 8, pp. 3048-3059, (2023)

← 1 2 3 →