Characterization of the surface functionality on precision machined engineering surfaces

被引：0
|
作者：
Aris, N.F.M. [1 ]
Cheng, K. [1 ]
机构：
[1] School of Engineering and Design, Brunel University, Uxbridge UB8 3PH Middlesex, United Kingdom
来源：
International Journal of Advanced Manufacturing Technology | 2008年 / 38卷 / 3-4期
关键词：
The surfaces characterization of a component generated from the machining process is important as the surfaces have significant effects on the performance of the component and associated product. The work presented aims to investigate the surfaces functionality characterization of a component by using 3D surface parameters. The paper also investigates the surface generation in relation with the machining process and the associated functionality formation. The corresponding surface characterization is investigated with two case studies on typical engineering components. The generation of the sample surfaces and associated surface functionalities are also studied by MATLAB-based modelling and simulation. The relationship between surface characterization and surface functionality are further studied by the simulations. The paper concludes with discussions on the applications and potential of this approach for the achievement of high quality surfaces; optimization and control of their functional performance at the machining stage. © 2007 Springer-Verlag London Limited;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：402 / 409
相关论文
共 50 条
  • [31] Optical fibers profilometer for diamond machined surfaces characterization
    Alayli, Y
    Bonis, M
    Wang, DP
    Revel, P
    Khanfir, H
    PROCEEDINGS OF THE THIRTEENTH ANNUAL MEETING OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1998, : 479 - 483
  • [32] Prediction of Surface Roughness on Electrical Discharge Machined Surfaces
    Jamunkar, Trilochan
    Sundaram, Murali
    Manufacturing Letters, 2022, 33 : 143 - 152
  • [33] Fractal characterization and simulation of surface microtopography machined with abrasive jet precision finishing with grinding wheel as restraint
    Liu, Feng
    Gong, Yadong
    Ke, Chang
    Cai, Guangqi
    ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY IX, 2008, 375-376 : 490 - +
  • [34] Measurement and Evaluation of the Geometric Error of Precision Machined Spherical Surface
    He, G. Y.
    Zheng, H. J.
    Tian, Y.
    Liu, J.
    SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING, 2008, 53-54 : 261 - 264
  • [35] Investigation of the surface integrity of precision machined single crystal silicon
    Ma, KJ
    Sheu, SC
    Lin, HY
    Chang, FY
    PROCEEDINGS OF THE FIFTEENTH ANNUAL MEETING OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 2000, : 82 - 85
  • [36] DIRECT COMPARISON OF MECHANICAL AND OPTICAL MEASUREMENTS OF THE FINISH OF PRECISION-MACHINED SURFACES
    CHURCH, EL
    PROCEEDINGS OF THE SOCIETY OF PHOTO-OPTICAL INSTRUMENTATION ENGINEERS, 1983, 429 : 105 - 112
  • [37] Study on the extraction and reconstruction of arbitrary frequency topography from precision machined surfaces
    Pang, Qilong
    Kuang, Liangjie
    Xu, Youlin
    Dai, Xiang
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2019, 233 (07) : 1772 - 1780
  • [38] The error analysis of the NC machined free form surfaces in reverse engineering
    Yen, CH
    Kao, JY
    Tarng, YS
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2005, 26 (9-10): : 1088 - 1098
  • [39] The error analysis of the NC machined free form surfaces in reverse engineering
    C.H. Yen
    J.Y. Kao
    Y.S. Tarng
    The International Journal of Advanced Manufacturing Technology, 2005, 26 : 1088 - 1098
  • [40] Surface roughness characterization of thermally sprayed and precision machined WC-Co and Alloy-625 coatings
    Zhong, Z. W.
    Peng, Z. F.
    Liu, N.
    MATERIALS CHARACTERIZATION, 2007, 58 (10) : 997 - 1005
12345