Molten salt-assisted combustion synthesis and characterization of MoSi2 and MoSi2-Si3N4 composite powders

被引：0

作者：

Manukyan, Kh.V. ^{[1
,2
]}

Aydinyan, S.V. ^{[1
]}

Kirakosyan, Kh.G. ^{[1
]}

Kharatyan, S.L. ^{[1
,2
]}

Blugan, G. ^{[3
]}

Müller, U. ^{[4
]}

Kuebler, J. ^{[3
]}

机构：

[1] Department of Inorganic Chemistry, Yerevan State University, A. Manukyan 1, Yerevan, AM-0025, Armenia

[2] Laboratory of Kinetics of SHS Processes, A.B. Nalbandyan Institute, Chemical Physics NAS of Armenia, P. Sevak 5/2, Yerevan, AM-0014, Armenia

[3] Laboratory of High Performance Ceramics, Empa, Swiss Federal Laboratories of Materials Testing and Research, Ueberlandstrasse 129, Duebendorf, CH-8600, Switzerland

[4] Laboratory of Nanoscale Materials Science, Empa, Swiss Federal Laboratories of Materials Testing and Research, Ueberlandstrasse 129, Duebendorf, CH-8600, Switzerland

来源：

Chemical Engineering Journal | 2008年 / 143卷 / 1-3期

关键词：

The possibilities of the synthesis of submicron MoSi2 and MoSi2-Si3N4 composite powders were investigated using inorganic salt-assisted combustion synthesis method. Combustion laws in the MoO3-3Mg-2Si-NaCl and Mo-5Si-NaCl-Si3N4-N2 systems were studied. The main factors influencing the combustion parameters; phase composition and microstructure of products for both these systems were determined experimentally. Optimum synthesis conditions of submicron MoSi2 and MoSi2-Si3N4 composite powders containing 30-40 wt.% of molybdenum disilicide were determined. Compacting conditions for 30 wt.% MoSi2-70 wt.% Si3N4 composite using the hot pressing technique were found. Compact samples 20 mm in diameter were obtained. Microstructure; phase and chemical compositions of the dense samples were studied. © 2008 Elsevier B.V. All rights reserved;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：331 / 336

共 50 条

[41] Effect of mechanical alloying on combustion synthesis of MoSi2
Park, HS
Shin, KS
Kim, YS
JOURNAL OF MATERIALS RESEARCH, 2001, 16 (11) : 3060 - 3068
[42] Rapid synthesis of MoSi2-Si3N4 nanocomposite via reaction milling of Si and Mo powder mixture
Abdellahi, Majid
Amereh, Alireza
Bahmanpou, Hamed
Sharafati, Behzad
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2013, 20 (11) : 1107 - 1114
[43] Rapid synthesis of MoSi2-Si3N4 nanocomposite via reaction milling of Si and Mo powder mixture
Majid Abdellahi
Alireza Amereh
Hamed Bahmanpou
Behzad Sharafati
International Journal of Minerals, Metallurgy, and Materials, 2013, 20 : 1107 - 1114
[44] Field-Activated Pressure-Assisted Combustion Synthesis of MoSi2
Gao, J. -Y.
Jiang, W.
INTERNATIONAL JOURNAL OF SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS, 2008, 17 (03) : 195 - 198
[45] Combustion synthesis of MoSi2 based composite and selective laser sintering thereof
Minasyan, Tatevik
Aghayan, Marina
Liu, Le
Aydinyan, Sofiya
Kollo, Lauri
Hussainova, Irina
Rodriguez, Miguel A.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2018, 38 (11) : 3814 - 3821
[46] Synthesis Of Si3N4-MOSi2 in situ composite from mechanically activated (Mo + Si3N4) powders
Singh, S
Godkhindi, MM
Krishnarao, RV
Murty, BS
JOURNAL OF ALLOYS AND COMPOUNDS, 2004, 381 (1-2) : 254 - 257
[47] Properties and densification of nanocrystalline MoSi2-Si3N4 composite from mechanically alloyed powders by pulsed current-activated sintering
Ko, In-Young
Kang, Hyun-Su
Doh, Jung-Mann
Yoon, Jin-Kook
Shon, In-Jin
JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 502 (01) : L10 - L13
[48] Effect of Si3N4 on the thermal expansion behavior of MoSi2
Univ of California at Irvine, Irvine, United States
Mater Lett, 5-6 (407-410):
[49] On the toughening mechanisms of MoSi2 reinforced Si3N4 ceramics
D. Sciti
G. Celotti
G. Pezzotti
S. Guicciardi
Applied Physics A, 2007, 86 : 243 - 248
[50] Rapid synthesis of MoSi2-Si3N4 nanocomposite via reaction milling of Si and Mo powder mixture
Majid Abdellahi
Alireza Amereh
Hamed Bahmanpou
Behzad Sharafati
InternationalJournalofMineralsMetallurgyandMaterials, 2013, 20 (11) : 1107 - 1114

← 1 2 3 4 5 →