Mass transfer characteristics of membrane surface in SMBR

被引:0
|
作者
Li, Chunli [1 ]
Tian, Rui [2 ]
Qiu, Guangming [1 ]
Tao, Zhonglan [1 ]
Wen, Jialong [1 ]
机构
[1] College of Energy and Power Engineering, Inner Mongolia University of Technology, Huhhot 010051, China
[2] Key Laboratory of Wind Energy and Solar Energy of the Ministry of Education, Inner Mongolia University of Technology, Huhhot 010051, China
关键词
Concentration polarization boundary layers - Gas - liquid two-phase flows - Mass transfer characteristics - Mass transfer parameters - Membrane bioreactor - Particle image velocimetry technique - Particle image velocimetry technologies - Submerged membrane;
D O I
10.6041/j.issn.1000-1298.2014.02.056
中图分类号
学科分类号
摘要
Particle image velocimetry (PIV) technique was used to test the gas-liquid two-phase flow field dynamics above the membrane approach in six different aeration intensity conditions. The liquid flow field above the membrane approach was tested, and the membrane surface mass transfer, thickness of concentration polarization boundary layer, shear stress and some other mass transfer parameters of membrane surface were calculated. The conclusion shows that the aeration intensity and liquid phase velocimetry strongly influence the characteristic of membrane surface mass transfer, and the aeration intensity increased in a certain range can make the membrane surface mass transfer characteristic strengthen. The paper provides experimental data and research experience for optimization design of membrane bio-reactor.
引用
收藏
页码:340 / 345
相关论文
共 50 条
  • [21] Experimental determination of mass transfer at the active surface of a membrane pervaporation cell
    Vachon, Gaëlic
    Legentilhomme, Patrick
    Lamer, Thierry
    Chemical Engineering and Technology, 2000, 23 (03): : 243 - 249
  • [22] Chain-length dependence of the antifouling characteristics of the glycopolymer-modified polypropylene membrane in an SMBR
    Gu, Jia-Shan
    Yu, Hai-Yin
    Huang, Lei
    Tang, Zhao-Qi
    Li, Wei
    Zhou, Jin
    Yan, Meng-Gang
    Wei, Xian-Wen
    JOURNAL OF MEMBRANE SCIENCE, 2009, 326 (01) : 145 - 152
  • [23] Flux enhancement for polypropylene microporous membrane in a SMBR by the immobilization of poly(N-vinyl-2-pyrrolidone) on the membrane surface
    Yu, Hai-Yin
    Xu, Zhi-Kang
    Xie, Ya-Jie
    Liu, Zhen-Mei
    Wang, Shu-Yuan
    JOURNAL OF MEMBRANE SCIENCE, 2006, 279 (1-2) : 148 - 155
  • [24] MASS-TRANSFER IN A MEMBRANE
    SUMBEROVA, V
    BLEHA, M
    CHEMICKE LISTY, 1989, 83 (12): : 1241 - 1255
  • [25] Mass transfer and equilibrium characteristics of defluorination from groundwater by emulsion liquid membrane
    Ye, Changwen
    Sun, Youhong
    Pei, Xiangjun
    Sun, Jin
    Wu, Yang
    JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY, 2017, 92 (01) : 76 - 82
  • [26] Heat and mass transfer characteristics of a direct contact membrane distillation process for desalination
    Termpiyakul, P
    Jiraratananon, R
    Srisurichan, S
    DESALINATION, 2005, 177 (1-3) : 133 - 141
  • [27] CHARACTERISTICS OF HEAT AND MASS-TRANSFER IN DIRECT-CONTACT MEMBRANE DISTILLATION
    KUROKAWA, H
    SAWA, T
    MITANI, K
    KAGAKU KOGAKU RONBUNSHU, 1991, 17 (06) : 1168 - 1174
  • [28] Effect of surface properties on the flow characteristics and mass transfer performance in microchannels
    Zhao, Yuchao
    Su, Yuanhai
    Chen, Guangwen
    Yuan, Quan
    CHEMICAL ENGINEERING SCIENCE, 2010, 65 (05) : 1563 - 1570
  • [29] The influence of membrane surface properties on the radionuclide mass transfer process in reverse osmosis
    Chen, Boxian
    Yu, Suping
    Zhao, Xuan
    SEPARATION AND PURIFICATION TECHNOLOGY, 2020, 252
  • [30] Heat and mass transfer characteristics of organic sorbent coated on heat transfer surface of a heat exchanger
    Hideo Inaba
    Fujio Komatsu
    Akihiko Horibe
    Naoto Haruki
    Akito Machida
    Heat and Mass Transfer, 2008, 44 : 1305 - 1313