Study on numerical simulation of multi-micro laser shock forming

被引：0
|
作者：
Dai, Yibin [1 ]
Fan, Yujie [1 ]
Li, Mingyao [1 ]
Liu, Xiaoyu [1 ]
Jiang, Pengsheng [1 ]
Yin, Kaiting [1 ]
机构：
[1] School of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang,212000, China
来源：
Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2015年 / 44卷
关键词：
ABAQUS software - Laser energies - Laser spots - Micro laser - Multi-point forming - Process parameters - Three-dimensional deformations;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In order to predict multi-micro laser shock forming, finite element model of multi-micro laser shock forming was built using ABAQUS software and simulation results were validated by experiment. On this basis, influence law of process parameters on micro laser shock forming was discussed. The results show that numerical simulation of multi-micro laser shock forming effectively shows three- dimensional deformation characteristics of laser impact area, and distribution of surface morphology under characteristic path is consistent with the experimental results. The influence law of sheet maximum deformation with laser energy, overlapping rate and diameter of laser spot conforms to experiment results. It confirms that numerical simulation can correctly predict the morphology of multi-micro laser shock forming, and provide good guidance for research on multi-micro laser shock forming. © 2015, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.
引用
收藏
页码：50 / 56
相关论文
共 50 条
  • [21] Numerical simulation and experiment of TA2 sheet forming under laser shock
    Gao, Li
    Yu, Jiayang
    Zhang, Yongkang
    Chinese Optics Letters, 2006, 4 (08) : 472 - 475
  • [22] Experimental and numerical simulation research on laser shock forming of thin metal sheet of brass
    Wang, Fei
    Yao, Zhenqiang
    Zhang, Xueping
    OPTICAL ENGINEERING, 2008, 47 (02)
  • [23] Numerical simulation and experiment of TA2 sheet forming under laser shock
    高立
    于加洋
    张永康
    Chinese Optics Letters, 2006, (08) : 472 - 475
  • [24] An Experimental Study on Micro Clinching of Metal Foils with Cutting by Laser Shock Forming
    Wang, Xiao
    Li, Cong
    Ma, Youjuan
    Shen, Zongbao
    Sun, Xianqing
    Sha, Chaofei
    Gao, Shuai
    Li, Liyin
    Liu, Huixia
    MATERIALS, 2016, 9 (07):
  • [25] Numerical simulation of laser shock cleaning process for micro-scale particle removal
    Oh, Bukuk
    Lee, Jin-Won
    Lee, Jong-Myoung
    Kim, Dongsik
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2008, 22 (5-6) : 635 - 650
  • [26] EXPERIMENTAL RESEARCH AND NUMERICAL SIMULATION OF LASER SHOCK FORMING OF TA2 TITANIUM SHEET
    F. Wang*
    ActaMetallurgicaSinica(EnglishLetters), 2006, (05) : 347 - 354
  • [27] Experiment and numerical simulation on laser shock forming of TA1 pure titanium sheet
    Zhang Q.-L.
    Peng X.-C.
    Han W.-D.
    Shi H.-Y.
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2019, 29 (02): : 350 - 360
  • [28] Experimental and numerical study on the micro-forming of copper multi-crystal
    Geng, XjaoLiang
    Zhang, Keshi
    Guo, YunQiang
    Qin, Liang
    ADVANCES IN HETEROGENEOUS MATERIAL MECHANICS 2008, 2008, : 183 - 189
  • [29] Numerical Simulation Application In Multi Point Forming
    Alfaidi, Mohamed Faraj
    Li Xiaoxing
    Nwir, Mohamed A.
    2010 2ND INTERNATIONAL CONFERENCE ON COMPUTER AND AUTOMATION ENGINEERING (ICCAE 2010), VOL 2, 2010, : 502 - 504
  • [30] Numerical simulation study of the stability of laser-driven shock waves
    Department of Physics, Capital Normal University, Beijing
    100048, China
    Guangxue Xuebao,
12345