Microstructure evolution during severe plastic deformation of IF steel

被引：0

作者：

Yan, Bo ^{[1
]}

Jiao, Si-Hai ^{[2
]}

Zhang, Dian-Hua ^{[1
]}

机构：

[1] State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, China

[2] Research Institute, Baoshan Iron and Steel Co., Ltd., Shanghai 201900, China

来源：

Dongbei Daxue Xuebao/Journal of Northeastern University | 2014年 / 35卷 / 04期

关键词：

Extrusion - Grain size and shape - Microstructure - Shear strain - Plastic deformation;

D O I：

10.3969/j.issn.1005-3026.2014.04.013

中图分类号：

学科分类号：

摘要：

Severe plastic deformation of IF steel was repeatedly carried out at room temperature by using semi-continuous equal channel angular extrusion(SC-ECAE). The microstructures evolution and the mechanisms of grain refinement during deformation were analyzed by EBSD. The results showed that the deformation primarily takes place in simple shear along the intersectional plane of the two extrusion channels, the plastic deformation is caused by shear strain, and the stress of deformation structures is reasonably uniform over the whole cross-section of the workpiece. The grain refinement is strengthened with the increase of strain. The final HAB fraction of about 90% is obtained and the HAB spacing decreases to less than 1 μm, and the overall grain size decreases to about 0.55 μm after 10 passes.

引用

页码：512 / 515

共 50 条

[21] Microstructure evolution in a pearlitic steel subjected to progressive plastic deformation
Toribio, J
Ovejero, E
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 234 : 579 - 582
[22] Martensitic transformations and the evolution of the defect microstructure of metastable austenitic steel during severe plastic deformation by high-pressure torsion
Litovchenko, I. Yu.
Tyumentsev, A. N.
Akkuzin, S. A.
Naiden, E. P.
Korznikov, A. V.
PHYSICS OF METALS AND METALLOGRAPHY, 2016, 117 (08): : 847 - 856
[23] Martensitic transformations and the evolution of the defect microstructure of metastable austenitic steel during severe plastic deformation by high-pressure torsion
I. Yu. Litovchenko
A. N. Tyumentsev
S. A. Akkuzin
E. P. Naiden
A. V. Korznikov
The Physics of Metals and Metallography, 2016, 117 : 847 - 856
[24] Evolution of the structure and strength of steel/vanadium alloy/steel hybrid material during severe plastic deformation
Rogachev, S. O.
Sundeev, R. V.
Khatkevich, V. M.
MATERIALS LETTERS, 2016, 173 : 123 - 126
[25] Microstructure and texture evolution during severe plastic deformation of CrMnFeCoNi high-entropy alloy
Skrotzki, W.
Pukenas, A.
Joni, B.
Odor, E.
Ungar, T.
Hohenwarter, A.
Pippan, R.
George, E. P.
7TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION, 2017, 194
[26] Evolution of microstructure and texture during severe plastic deformation of the aluminium alloy AA2099
Agrawal, Shavi
Panigrahi, Ajit
Avadhani, G. S.
Suwas, Satyam
JOURNAL OF MATERIALS SCIENCE, 2025, 60 (03) : 1361 - 1380
[27] Microstructural evolution during processing by severe plastic deformation
Langdon, TG
Furukawa, M
Horita, Z
Nemoto, M
INVESTIGATIONS AND APPLICATIONS OF SEVERE PLASTIC DEFORMATION, 2000, 80 : 149 - 154
[28] On the Processing Pathway Dependence of Microstructure Evolution During Severe Plastic Deformation: Nickel as a Case Example
Prokoshkina, Daria
Moros, Anna
Reglitz, Gerrit
Dinda, Guru Prasad
Kuznetsov, Dmitrij D.
Popov, Vladimir V.
Stolbovsky, Alexey V.
Shorohov, Evgeniy
Divinski, Sergiy V.
Wilde, Gerhard
ADVANCED ENGINEERING MATERIALS, 2015, 17 (12) : 1842 - 1852
[29] Regularities of Microstructure Evolution in a Cu-Cr-Zr Alloy during Severe Plastic Deformation
Bodyakova, Anna
Tkachev, Maksim
Raab, Georgy, I
Kaibyshev, Rustam
Belyakov, Andrey N.
MATERIALS, 2022, 15 (16)
[30] Effect of Severe Plastic Deformation on microstructure and properties of duplex stainless steel
Gennari, C.
Pezzato, L.
Llorca-Isern, N.
Lopez, I.
Cabrera, J. M.
Chand, M.
Roca, A.
Calliari, I.
METALLURGIA ITALIANA, 2017, (09): : 17 - 25

← 1 2 3 4 5 →