Effect of different water reducing agents on mechanical properties and micro-mechanism of modified hemihydrate phosphogypsum cementitious materials

被引:1
|
作者
Wu, Qin [1 ]
Long, Qijun [1 ]
Tao, Jia [2 ]
Zhang, Huagang [3 ]
Chen, Chuanxiang [1 ]
Wang, Jianxiang [1 ]
Yu, Fang [1 ]
机构
[1] Guizhou Minzu Univ, Sch Civil Engn & Architecture, Guiyang 550025, Peoples R China
[2] Mat Ind Co Ltd, Bur Grp Corp China Railway 5, Guiyang 550001, Peoples R China
[3] Guizhou Univ, Space Struct Res Ctr, Guiyang 550025, Peoples R China
基金
中国国家自然科学基金;
关键词
Hemihydrate phosphogypsum; Quicklime; Water reducing agent; Crystal morphology; Compressive strength; GYPSUM;
D O I
10.1016/j.conbuildmat.2024.139390
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The stockpiling of industrial by-product phosphogypsum causes pollution to the environment, and its effective utilization can be achieved by using cementitious materials from undisturbed hemihydrate phosphogypsum (UHPG) obtained by hemihydrate-wet process. This study investigated the creation of modified hemihydrate phosphogypsum mixture by proportionally blending quicklime with UHPG. Modified hemihydrate phosphogypsum cementitious material (MPGCM) was then prepared using melamine superplasticizer (SM) or naphthalene superplasticizer (FDN). The effects of these water reducing agents on the mechanical properties and micromechanisms of MPGCM were evaluated by single-factor experimental method. The results showed that both SM and FDN were effective in reducing water consumption and enhancing the fluidity of MPGCM. Additionally, both superplasticizers delayed the establishment of the MPGCM, with FDN showing a stronger retarding effect than SM. Compared with those mixed with FDN, the specimens mixed with SM exhibited markedly greater flexural and compressive strengths. The specimens with 2 % SM content achieved the highest 28 d flexural strength and compressive strength, measuring 16.61 MPa and 42.26 MPa. Microscopic analysis revealed that the water reducing agent can not only inhibit the disaggregation and dissolution of calcium sulfate hemihydrate and the crystallization of calcium sulfate dihydrate, but also promote the transformation of calcium sulfate dihydrate crystals from long rods to short columns or plates, so that the reticular structure is more compact and the mechanical strength is improved. This study suggests that the optimal composition, consisting of 97 % UHPG, 3 % quicklime, and 2 % SM, yields the optimum mechanical properties. These results provide a theoretical foundation for the application of phosphogypsum in practical engineering and support the sustainable development of phosphorus chemical industries.
引用
收藏
页数:11
相关论文
共 39 条
  • [31] Effect of cathodic polarization and sulfate reducing bacteria on mechanical properties of different steels in synthetic sea water
    Domzalicki, P.
    Lunarska, E.
    Birn, J.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2007, 58 (06): : 413 - 421
  • [32] Exploring the mechanism of micro-nano bubble water in enhancing the mechanical properties of sulfoaluminate cement-based materials
    Chang, Jun
    Zhang, Hong
    Liu, Fangyu
    Cui, Kai
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 411
  • [33] Micro-structural and mechanical properties of PVA fiber reinforced engineered cementitious composite incorporating natural and artificial pozzolanic materials under different temperatures
    Mousavinejad, Seyed Hosein Ghasemzadeh
    Alemi, Mir Parsa
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 346
  • [34] Micro-structural and mechanical properties of PVA fiber reinforced engineered cementitious composite incorporating natural and artificial pozzolanic materials under different temperatures
    Mousavinejad, Seyed Hosein Ghasemzadeh
    Alemi, Mir Parsa
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 346
  • [35] Experimental analysis on water penetration resistance and micro properties of concrete: Effect of supplementary cementitious materials, seawater, sea-sand and water-binder ratio
    Liu, Jun
    Liu, Jiaying
    Fan, Xu
    Jin, Hesong
    Zhu, Jihua
    Huang, Zhenyu
    Xing, Feng
    Sui, Tongbo
    JOURNAL OF BUILDING ENGINEERING, 2022, 50
  • [36] Effect of main and side chain length change of polycarboxylate-ether-based water-reducing admixtures on the fresh state and mechanical properties of cementitious systems
    Ozen, Suleyman
    Altun, Muhammet Gokhan
    Mardani-Aghabaglou, Ali
    Ramyar, Kambiz
    STRUCTURAL CONCRETE, 2020, 22 (S1) : E607 - E618
  • [37] Effect of Different Water-Binder Ratios and Fiber Contents on the Fluidity and Mechanical Properties of PVA-ECC Materials
    Xin, Qin
    Gao, Ruyu
    Shao, Pengtao
    Lv, Wenbo
    Wei, Hao
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2023, 30 (05): : 1366 - 1372
  • [38] Effect of different coupling agents on the interfacial properties of tube-internally insulated foam materials interface in a composite cross-arm under water environment
    Liu, Yunpeng
    Li, Le
    Liu, Hechen
    Li, Xiaolin
    Liu, Donggen
    Liu, Lei
    Tang, Li
    Zhou, Songsong
    HIGH VOLTAGE, 2021, 6 (02) : 242 - 254
  • [39] Effect of different fiber sizing on basalt fiber-reinforced cement-based materials at low temperature: From macro mechanical properties to microscopic mechanism
    Xu, Xuefeng
    Cui, Sheng'ai
    Xu, Lilin
    Zeng, Guang
    Wang, Xuewei
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 392