An investigation of the potential of EGR stratification for reducing pressure rise rate in HCCI combustion by using rapid compression machine

被引：0
|
作者：
Odajima, Ryo [1 ]
Shirota, Daisuke [1 ]
Iida, Norimasa [1 ]
机构：
[1] Department of System Design Engineering, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama, 223-8522, Japan
来源：
SAE Technical Papers | 2011年
关键词：
Compendex;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Specific heat
引用
收藏
相关论文
共 50 条
  • [41] Diesel combustion with a rapid compression-expansion machine (2nd report. Real rate of heat release at high combustion temperature)
    No, Suk Hong
    Kobori, Shigeharu
    Kamimoto, Takeyuki
    Enomoto, Yoshiteru
    Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1991, 57 (540): : 2833 - 2838
  • [42] Study of diesel spray combustion and ignition using high-pressure fuel injection and a micro-hole nozzle with a rapid compression machine: Improvement of combustion using low cetane number fuel
    Keio Univ, Yokohama-shi, Japan
    JSAE Rev, 4 (319-327):
  • [43] Study of cycle-by-cycle variations of natural gas direct injection combustion using a rapid compression machine
    Huang, ZH
    Shiga, S
    Ueda, T
    Nakamura, H
    Ishima, T
    Obokata, T
    Tsue, M
    Kono, M
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2003, 217 (D1) : 53 - 61
  • [44] Comparison of Methane Combustion Mechanisms Using Shock Tube and Rapid Compression Machine Ignition Delay Time Measurements
    Zhang, Peng
    Zsely, Istvan Gy
    Samu, Viktor
    Nagy, Tibor
    Turanyi, Tamas
    ENERGY & FUELS, 2021, 35 (15) : 12329 - 12351
  • [45] Basic characteristics of direct injection combustion fuelled with compressed natural gas and gasoline using a rapid compression machine
    Huang, ZH
    Shiga, S
    Ueda, T
    Nakamura, H
    Ishima, T
    Obokata, T
    Tsue, M
    Kono, M
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2003, 217 (D11) : 1031 - 1038
  • [46] A study of the combustion and emission characteristics of compressed-natural-gas direct-injection stratified combustion using a rapid-compression-machine
    Shiga, S
    Ozone, S
    Machacon, HTC
    Karasawa, T
    Nakamura, H
    Ueda, T
    Jingu, N
    Huang, Z
    Tsue, M
    Kono, M
    COMBUSTION AND FLAME, 2002, 129 (1-2) : 1 - 10
  • [47] Numerical analysis of the effect of inhomogeneous pre-mixture on the pressure rise rate in an HCCI engine using multi-zone chemical kinetics
    O. T. Lim
    International Journal of Automotive Technology, 2014, 15 : 535 - 541
  • [48] An Investigation on the Ignition Characteristics of Lubricant Component Containing Fuel Droplets Using Rapid Compression and Expansion Machine
    Kassai, Masaharu
    Shiraishi, Taisuke
    Noda, Toru
    Hirabe, Mamoru
    Wakabayashi, Yoshiki
    Kusaka, Jin
    Daisho, Yasuhiro
    SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS, 2016, 9 (03) : 469 - 480
  • [49] NUMERICAL ANALYSIS OF THE EFFECT OF INHOMOGENEOUS PRE-MIXTURE ON THE PRESSURE RISE RATE IN AN HCCI ENGINE USING MULTI-ZONE CHEMICAL KINETICS
    Lim, O. T.
    INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2014, 15 (04) : 535 - 541
  • [50] Surrounding gas effects on soot foundation and oxidation processes-observation (diesel spray combustion using a rapid compression machine)
    Iida, Norimasa
    Watanabe, Kei
    Ohashi, Hideki
    Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1993, 59 (561): : 318 - 324
12345