Effects of plasma polymerized acrylic acid film on the adhesion of Ag tracks screen-printed on polyimide

被引：0
|
作者：
机构：
[1] Kim, Kwang-Seok
[2] Myung, Woo-Ram
[3] Jung, Seung-Boo
来源：
Jung, S.-B. (sbjung@skku.ac.kr) | 1600年 / Taylor and Francis Inc.卷 / 88期
关键词：
The adhesion of conductive patterns printed on polymer substrates is an indispensible issue for the commercialization of printable and flexible electronic devices. Plasma treatment has been widely used to improve the interfacial adhesion between a metal and a flexible polymer substrate. This study aims to investigate the influence of a polymerized acrylic acid layer coated by atmospheric-pressure plasma (APP) on the adhesion of a screen-printed silver (Ag)/polyimide (PI) system. The acidic oxygen-containing functional groups were incorporated onto a PI film by plasma polymerization of acrylic acid and; on it; the conductive tracks were constructed with a Ag nanopaste via screen printing. The Ag tracks were sintered at various temperatures ranging from 150 to 300°C for 30min in air. The adhesion was evaluated by a roll-type 90% peel test. The peel strength of the screen-printed Ag/PI system with the acrylic acid film approximately quadrupled. To understand this adhesion enhancement; field emission scanning microscopy (FE-SEM); atomic force microscopy (AFM); contact angle analyzer; and X-ray photoelectron spectroscopy (XPS) were utilized. It was confirmed from these analyses that a hydrophilic film was formed due to the plasma polymerization process; and the carbon-oxygen (C-0)and carbonyl (C=0) bonds increased at the interfacial surface. Under the optimized conditions; a maximum adhesion of 245.5N/m was obtained; and the stronger adhesion with the acrylic acid coating influenced the improvement in the flexibility of the film. Copyright © Taylor & Francis Group; LLC;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Conference article (CA)
引用
收藏
页码：4 / 6
相关论文
共 50 条
  • [31] Amperometric sensing of ascorbic acid using a disposable screen-printed electrode modified with electrografted o-aminophenol film
    Nassef, Hossam M.
    Civit, Laia
    Fragoso, Alex
    O'Sullivan, Ciara K.
    ANALYST, 2008, 133 (12) : 1736 - 1741
  • [32] Effects of paste components on the properties of screen-printed porous TiO2 film for dye-sensitized solar cells
    Fan, Ke
    Liu, Min
    Peng, Tianyou
    Ma, Liang
    Dai, Ke
    RENEWABLE ENERGY, 2010, 35 (02) : 555 - 561
  • [33] Screen-printed biosensor with alkaline phosphatase immobilized in sol-gel/chitosan film for the detection of 2,4-dichlorophenoxyacetic acid
    Shyuan, LK
    Heng, LY
    Ahmad, M
    Aziz, SA
    Ishak, Z
    SENSOR LETTERS, 2006, 4 (01) : 17 - 21
  • [34] Amperometric Determination of Ascorbic Acid in Real Samples Using a Disposable Screen-Printed Electrode Modified with Electrografted o-Aminophenol Film
    Civit, Laia
    Nassef, Hossam M.
    Fragoso, Alex
    O'Sullivan, Ciara K.
    JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY, 2008, 56 (22) : 10452 - 10455
  • [35] Determination of total bile acid levels using a thick-film screen-printed Ir/C sensor for the detection of liver disease
    Bartling, Brandon
    Li, Lu
    Liu, Chung-Chiun
    ANALYST, 2009, 134 (05) : 973 - 979
  • [36] A Nonenzymatic Glucose Sensor Based on the Excellent Dispersion of a Graphene Oxide-Poly(acrylic acid)-Palladium Nanoparticle-Modified Screen-Printed Carbon Electrode
    Samoson, Kritsada
    Thavarungkul, Panote
    Kanatharana, Proespichaya
    Limbut, Warakorn
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2019, 166 (13) : B1079 - B1087
  • [37] Simultaneous Determination of Acetaminophen and Tyrosine Using Screen-printed Electrochemical Sensor Based on MWCNTs-doped Poly(glycine)/Poly(acrylic acid) Conducting Polymers
    Wei, Zhiqiang
    Guo, Shaofang
    Cheng, Liuyang
    Li, Ting
    Zhang, Yanli
    Yang, Hui
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2019, 14 (07): : 6748 - 6758
  • [38] Specific contact resistance measurements of the screen-printed Ag thick film contacts in the silicon solar cells by three-point probe methodology and TLM method
    Vinod, P. N.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2011, 22 (09) : 1248 - 1257
  • [39] Specific contact resistance measurements of the screen-printed Ag thick film contacts in the silicon solar cells by three-point probe methodology and TLM method
    P. N. Vinod
    Journal of Materials Science: Materials in Electronics, 2011, 22 : 1248 - 1257
  • [40] The fire-through processed screen-printed Ag thick film metal contacts formed on an electrochemically etched porous silicon antireflection coating of silicon solar cells
    Vinod, P. Narayanan
    RSC ADVANCES, 2013, 3 (11) : 3618 - 3622
12345