Experimental and numerical study of cutting forces and temperature fields when dry turning aluminum alloy

被引：0
|
作者：
Feng, Lin [1 ]
机构：
[1] Guangdong Polytechnic Normal University, Guangzhou, 510635, China
来源：
Key Engineering Materials | 2009年 / 407-408卷
关键词：
Aluminum alloys - Numerical methods - Cutting - Strain rate - Temperature distribution;
D O I：
10.4028/www.scientific.net/KEM.407-408.465
中图分类号：
学科分类号：
摘要：
A Lagrange finite element model is presented that simulates cutting forces and temperature distributions when orthogonal turning aluminum alloy. The effect of the large strain, strain-rate and temperature associated with cutting on the material properties is taken into account. The model predicts chip geometry, stress, strain and temperature distribution in the workpiece, chip, and tool. Cutting experiments were performed to validate the model. © (2009) Trans Tech Publications, Switzerland.
引用
收藏
页码：465 / 468
相关论文
共 50 条
  • [31] The Optimum Cutting Condition when High Speed Turning of Aluminum Alloy using Uncoated Carbide
    Umroh, B.
    Muhathir
    Darianto
    1ST INTERNATIONAL CONFERENCE ON INDUSTRIAL AND MANUFACTURING ENGINEERING, 2019, 505
  • [32] Effects of cutting parameters on dry cutting of aluminum bronze alloy
    Shengguan Qu
    Fujian Sun
    Liang Zhang
    Xiaoqiang Li
    The International Journal of Advanced Manufacturing Technology, 2014, 70 : 669 - 678
  • [33] Effects of cutting parameters on dry cutting of aluminum bronze alloy
    Qu, Shengguan
    Sun, Fujian
    Zhang, Liang
    Li, Xiaoqiang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 70 (1-4): : 669 - 678
  • [34] Machinability and cutting force modeling of 7055 aluminum alloy with wide temperature range based on dry cutting
    Ping Zhang
    Xian Cao
    Xiancheng Zhang
    Youqiang Wang
    The International Journal of Advanced Manufacturing Technology, 2020, 111 : 2787 - 2808
  • [35] Machinability and cutting force modeling of 7055 aluminum alloy with wide temperature range based on dry cutting
    Zhang, Ping
    Cao, Xian
    Zhang, Xiancheng
    Wang, Youqiang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 111 (9-10): : 2787 - 2808
  • [36] In-process detection of cutting forces and cutting temperature signals in cryogenic assisted turning of titanium alloys: An analytical approach and experimental study
    Gupta, Munish Kumar
    Korkmaz, Mehmet Erdi
    Sarikaya, Murat
    Krolczyk, Grzegorz M.
    Guenay, Mustafa
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2022, 169
  • [37] Experimental and numerical investigation of cutting forces during turning of cylindrical AISI 4340 steel specimens
    Iynen, Ogur
    Eksi, Abdul Kadir
    Ozdemir, Mustafa
    Akyildiz, Hamza Kemal
    MATERIALS TESTING, 2021, 63 (05) : 402 - 410
  • [38] Effect of secondary hardening on cutting forces, cutting temperature, and tool wear in hard turning of high alloy tool steels
    El Hakim, M. A.
    Shalaby, M. A.
    Veldhuis, S. C.
    Dosbaeva, G. K.
    MEASUREMENT, 2015, 65 : 233 - 238
  • [39] Study of Cutting Forces in Drilling of Aluminum Alloy 2024-T351
    Craciun, Razvan Sebastian
    Teodor, Virgil Gabriel
    Baroiu, Nicusor
    Paunoiu, Viorel
    Morosanu, Georgiana-Alexandra
    MACHINES, 2024, 12 (12)
  • [40] Study on Numerical Modeling of Three Dimensional Oblique Cutting for Aluminum Alloy Cutting Process
    Zhang, Xianghua
    Dai, Guohong
    ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION, PTS 1 AND 2, 2011, 37-38 : 1316 - 1320
12345