Technological Causes of Vertical Workpiece Asymmetry in Plate Rolling Mills

被引：0

作者：

Karandaev, A.S. ^{[1
]}

Zinchenko, M.A. ^{[1
]}

Semitko, A.Y. ^{[1
]}

Evdokimov, S.A. ^{[2
]}

Petukhova, O.I. ^{[2
]}

机构：

[1] South Ural State University, 76, Lenin Avenue, Chelyabinsk,4540800, Russia

[2] Nosov Magnitogorsk State Technical University, 38, Lenin Avenue, Magnitogorsk,455000, Russia

来源：

Lecture Notes in Mechanical Engineering | 2023年

关键词：

Engineering Village;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Academic paper - Cause - Compensation - Emergency stop - Impact - Plate mills - Plate rolling mills - SKI effect - Technological factors - Workpiece

引用

页码：759 / 768

共 50 条

[41] DEFORMATION STATE WHEN ROLLING IN STANDS WITH VERTICAL ROLLS OF CONTINUOUS WIDE-STRIP MILLS
SAFYAN, MM
MOLCHANOV, AI
STEEL IN THE USSR, 1978, 8 (09): : 517 - 519
[42] Causes and methods of alleviating variations in the shading of tin plate during temper rolling
Yu. E. Golkin
Yu. A. Sabel’nikov
I. I. Kuz’minov
O. V. Vinokurov
Metallurgist, 2004, 48 : 568 - 572
[43] Vertical Vibration Model for Unsteady Lubrication in Rolls-Strip Interface of Cold Rolling Mills
Yang, Xu
Li, Qing
Tong, Chao-nan
Liu, Qi-han
ADVANCES IN MECHANICAL ENGINEERING, 2012,
[44] Advancement of Roll-Gap Control to Curb the Camber in Heavy-Plate Rolling Mills
Radionov, Andrey A.
Gasiyarov, Vadim R.
Karandaev, Alexander S.
Loginov, Boris M.
Khramshin, Vadim R.
APPLIED SCIENCES-BASEL, 2021, 11 (19):
[45] Causes and methods of alleviating variations in the shading of tin plate during temper rolling
Golkin, YE
Sabel'nikov, YA
Kuz'minov, II
Vinokurov, OV
METALLURGIST, 2004, 48 (11-12) : 568 - 572
[46] CALCULATION OF CRITICAL FORCES AND REDUCTIONS OF SEMIS IN EDGING STANDS OF HOT PLATE ROLLING-MILLS
CHELENKO, VF
SEROV, VI
NIZHNIK, PP
NIZHNIK, SS
STEEL IN THE USSR, 1985, 15 (05): : 222 - 223
[47] CAUSES OF GENERATION OF DYNAMIC LOADS AND WAYS OF LOWERING THEM IN DRIVE LINE OF SHEET-ROLLING MILLS
LEEPA, II
LOGINOVA, KS
SKICHKO, PY
STEEL IN THE USSR, 1973, 3 (11): : 938 - 940
[48] Asymmetry of the roll gap as a factor improving work of the hydraulic gauge control in the plate rolling mill
Dyja, H
Markowski, J
Stoinski, D
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 60 (1-4) : 73 - 80
[49] Simulation of through production processes for manufacturing thick-walled plate in hot rolling reversing mills
V. V. Orlov
E. I. Khlusova
Metallurgist, 2013, 56 : 832 - 843
[50] SIMULATION OF THROUGH PRODUCTION PROCESSES FOR MANUFACTURING THICK-WALLED PLATE IN HOT ROLLING REVERSING MILLS
Orlov, V. V.
Khlusova, E. I.
METALLURGIST, 2013, 56 (11-12) : 832 - 843

← 1 2 3 4 5 →