A proposal of temperature-time function on the strength development of concrete under sub-zero temperature

被引:0
|
作者
Materials and Properties Section, Production Engineering Dept., Hokkaido Northern Regional Building Research Ins., Japan [1 ]
不详 [2 ]
不详 [3 ]
不详 [4 ]
机构
来源
J. Struct. Constr. Eng. | 2009年 / 640卷 / 995-1003期
关键词
Freezing - Compressive strength;
D O I
10.3130/aijs.74.995
中图分类号
TU528 [混凝土及混凝土制品]; TV43 [水工混凝土和砂浆];
学科分类号
摘要
Compressive strength development of concrete is essential for cold weather concreting. It is well known that strength development of concrete under the freezing point is much delayed. But the evaluation method has not been shown clearly yet. Therefore when average outside air temperature is under the freezing point planning method of cold weather concreting is not clear. We focus on the concept of equivalent maturity method proposed by Sudo. attempted to propose a time-temperature function representing the strength development of concrete under sub-zero temperature. As a result, we have proposed a function to calculate the maturity under sub-zero temperature. The proposed function could explain the strength development of the concrete exposure in winter.
引用
收藏
相关论文
共 50 条
  • [41] Sub-Zero Temperature Sensor Based on Laser-Written Carbon
    Baek, Seungho
    Kim, Junil
    Pujar, Pavan
    Kwon, Hyuk-Jun
    Kim, Sunkook
    Gandla, Srinivas
    ADVANCED ELECTRONIC MATERIALS, 2022, 8 (07):
  • [42] Sub-zero temperature mechanically stable low molecular weight hydrogels
    Fayter, Alice E. R.
    Gibson, Matthew I.
    Draper, Emily R.
    JOURNAL OF MATERIALS CHEMISTRY B, 2018, 6 (44) : 7274 - 7279
  • [43] Strength characteristics of concrete exposed to the elevated temperatures according to the temperature-time curve ISO 834
    Rozsypalova, Iva
    Danek, Petr
    Simonova, Hana
    Kersner, Zbynek
    DYNAMICS OF CIVIL ENGINEERING AND TRANSPORT STRUCTURES AND WIND ENGINEERING (DYN-WIND'2017), 2017, 107
  • [44] Increased crashworthiness due to arctic conditions - The influence of sub-zero temperature
    Ehlers, Soren
    Ostby, Erling
    MARINE STRUCTURES, 2012, 28 (01) : 86 - 100
  • [45] Sub-zero temperature behavior of water in non-ionic microemulsions
    Garti, N
    Aserin, A
    Tiunova, I
    Ezrahi, S
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 1998, 51 (01) : 63 - 78
  • [46] Spray characteristics of fouled gasoline direct injectors under flash boiling and sub-zero temperature conditions
    Kim, Donghwan
    Park, Sungwook
    CASE STUDIES IN THERMAL ENGINEERING, 2022, 37
  • [47] Microorganism inactivation using high-pressure generation in sealed vessels under sub-zero temperature
    K. Hayakawa
    Y. Ueno
    S. Kawamura
    T. Kato
    R. Hayashi
    Applied Microbiology and Biotechnology, 1998, 50 : 415 - 418
  • [48] Microorganism inactivation using high-pressure generation in sealed vessels under sub-zero temperature
    Hayakawa, K
    Ueno, Y
    Kawamura, S
    Kato, T
    Hayashi, R
    APPLIED MICROBIOLOGY AND BIOTECHNOLOGY, 1998, 50 (04) : 415 - 418
  • [49] Review of methods for the high-cycle fatigue strength assessment of steel structures subjected to sub-zero temperature
    Braun, Moritz
    Ehlers, Soren
    MARINE STRUCTURES, 2022, 82
  • [50] Probing the interaction between biomolecules under sub-zero temperature conditions by electrophoresis in ice grain boundaries
    Kimijima, Junya
    Inagawa, Arinori
    Miyagawa, Akihisa
    Nasuno, Eri
    Uehara, Nobuo
    ANALYTICA CHIMICA ACTA, 2024, 1311