The microstructure of AlSi7Mg alloy in as cast condition

被引：6
|
作者：
Silesian University of Technology, ul. Krasińskiego 8, Katowice [1 ]
40-019, Poland
不详 [2 ]
02-507, Poland
机构：
来源：
Solid State Phenomena | / 3-10期
关键词：
Scanning electron microscopy - High resolution transmission electron microscopy - Magnesium alloys - Magnesium compounds - Microstructure - Silicon alloys;
D O I：
10.4028/www.scientific.net/SSP.229.3
中图分类号：
学科分类号：
摘要：
The complex microstructure of as-cast AlSi7Mg alloy has been investigated. Microstructure observations were done using light microscopy, scanning electron microscopy and transmission electron microscopy. Chemical composition of the microstructure constituents was investigated by means of energy dispersive spectrometry, conducted both during SEM and STEM investigations. Selected area diffraction was used to identify the phases in the alloy. Microstructure of the alloy in the as-cast condition consists of Al-Si eutectic and intermetallic phases in the interdendritic regions. These are: Mg2Si, α-AlFeMnS, β-AlFeSi and π-AlFeSiMg phases. What is more, number of fine precipitates were found within the α-Al dendrites. Only the occurrence of U1 (MgAl2Si2) phase has been confirmed. © (2015) Trans Tech Publications, Switzerland.
引用
收藏
相关论文
共 50 条
  • [11] Microstructure and Mechanical Properties of Selective Laser Melted AlSi7Mg Alloy
    Zou T.
    Ou Y.
    Zhu H.
    Qin J.
    Cailiao Daobao/Materials Reports, 2020, 34 (05): : 10098 - 10102
  • [12] Microstructure and properties of AlSi7Mg alloy fabricated by selective laser melting
    Shuai Huang
    Shao-qing Guo
    Biao Zhou
    Guo-hui Zhang
    Xue-jun Zhang
    China Foundry, 2021, 18 (04) : 416 - 423
  • [13] Microstructure and properties of AlSi7Mg alloy fabricated by selective laser melting
    Shuai Huang
    Shao-qing Guo
    Biao Zhou
    Guo-hui Zhang
    Xue-jun Zhang
    China Foundry, 2021, 18 : 416 - 423
  • [14] Microstructure and properties of AlSi7Mg alloy fabricated by selective laser melting
    Huang, Shuai
    Guo, Shao-qing
    Zhou, Biao
    Zhang, Guo-hui
    Zhang, Xue-jun
    CHINA FOUNDRY, 2021, 18 (04) : 416 - 423
  • [15] EFFECT OF PRESSURE ON THE CRYSTALLISATION OF AlSi7Mg ALLOY
    Pastircak, R.
    Scury, J.
    ARCHIVES OF METALLURGY AND MATERIALS, 2017, 62 (04) : 2193 - 2198
  • [16] Effect of pouring temperatures on the microstructure of the semi-solid AlSi7Mg alloy
    Mao, W.M.
    Yang, J.L.
    Zhao, A.M.
    Cui, C.L.
    Zhong, X.Y.
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2001, 23 (01):
  • [17] Low-Convection-Cooling Slope Cast AlSi7Mg Alloy: A Rheological Perspective
    Ritwik, R.
    Rao, A. K. Prasada
    Dhindaw, B. K.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (09) : 2487 - 2492
  • [18] Low-Convection-Cooling Slope Cast AlSi7Mg Alloy: A Rheological Perspective
    R. Ritwik
    A. K. Prasada Rao
    B. K. Dhindaw
    Journal of Materials Engineering and Performance, 2013, 22 : 2487 - 2492
  • [19] Effects of Isothermal Process Parameters on the Microstructure of Semisolid Alsi7mg Alloy Produced by EPM
    Tian Wentong
    Zhang Guangan
    FRONTIER IN FUNCTIONAL MANUFACTURING TECHNOLOGIES, 2010, 136 : 202 - +
  • [20] Optimization of Heat Treatment Parameters of AlSi7Mg Alloy
    Pezda, Jacek
    MATERIALS, 2022, 15 (03)
12345