Influence of process parameters on packing density of open-end and core-sheath friction spun yarns

被引：0
|
作者：
Ishtiaque, S.M. [1 ]
Dasa, A. [1 ]
Vishnoi, Prashant [1 ]
机构：
[1] Department of Textile Technology, Indian Institute of Technology, New Delhi 110 016, India
来源：
Indian Journal of Fibre and Textile Research | 2011年 / 36卷 / 02期
关键词：
Atmospheric pressure - Friction - Wool - Yarn;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effect of opening roller speed, difference in drum speed and suction air pressure on packing density parameters of open-end and core-sheath friction spun yarns has been analyzed using the Box-Behnken method and response surface equations. The trends of change in packing density with process variables are found to be opposite to those of yarn diameter. Yarn diameter decreases, and helix angle and packing density increase with the increase in suction air pressure for open-end and core-sheath friction spun yarns. Core-sheath friction yarns have lower yarn diameter and helix angle, but higher packing density than open-end friction yarns.
引用
收藏
页码：152 / 157
相关论文
共 50 条
  • [21] Analysis of the Influence of Process Parameters on the Mechanical Properties of Carbon Core Friction Spun Hybrid Yarns for Composites
    Hasan, Mir Mohammad Badrul
    Cherif, Chokri
    FIBRES & TEXTILES IN EASTERN EUROPE, 2011, 19 (04) : 59 - 64
  • [22] Performance of open-end and ring spun yarns in weft knitted fabrics
    Candan, C
    Nergis, UB
    Iridag, Y
    TEXTILE RESEARCH JOURNAL, 2000, 70 (02) : 177 - 181
  • [23] COMPARISON OF PERFORMANCE OF OPEN-END AND RING SPUN YARNS IN TERRY TOWELING
    LORD, PR
    TEXTILE RESEARCH JOURNAL, 1974, 44 (07) : 516 - 522
  • [24] Spinning conditions and characteristics of open-end rotor spun hybrid yarns
    Pouresfandiari, F
    Fushimi, S
    Sakaguchi, A
    Saito, H
    Toriumi, K
    Nishimatsu, T
    Shimizu, Y
    Shirai, H
    Matsumoto, Y
    Gong, H
    TEXTILE RESEARCH JOURNAL, 2002, 72 (01) : 61 - 70
  • [25] PREDICTING MACHINE TWIST IN ROTOR OPEN-END SPUN COTTON YARNS
    BARELLA, A
    CASTRO, L
    MANICH, AM
    DECASTELLAR, MD
    TEXTILE RESEARCH JOURNAL, 1988, 58 (07) : 425 - 426
  • [26] TWIST DISTRIBUTION IN OPEN-END FRICTION-SPUN YARN
    LORD, PR
    RUST, JP
    JOURNAL OF THE TEXTILE INSTITUTE, 1990, 81 (02) : 211 - 213
  • [27] INFLUENCE OF THE COTTON GINNING TECHNIQUES ON THE OPEN-END SPINNING PROCESSES AND ON THE PROPERTIES OF OPEN-END YARNS
    HARMANCIOGLU, M
    ERCAN, MN
    MELLIAND TEXTILBERICHTE INTERNATIONAL TEXTILE REPORTS, 1981, 62 (02): : 135 - 139
  • [28] EFFECT OF TWIST, CORE-SHEATH PARAMETERS AND POST-DYEING TREATMENT ON CHARACTERISTICS OF NYLON-VISCOSE CORE-SPUN YARNS.
    Tyagi, G.K.
    Singh, H.D.
    1600, (12):
  • [29] Investigation of Vortex Spun Yarn Properties in Comparison with Conventional Ring and Open-end Rotor Spun Yarns
    Erdumlu, Nazan
    Ozipek, Bulent
    Oztuna, A. Selda
    Cetinkaya, Seda
    TEXTILE RESEARCH JOURNAL, 2009, 79 (07) : 585 - 595
  • [30] The Effect of Spinning Parameters on Friction Spun Core Yarns Tensile Properties
    Altas, Sevda
    TEKSTIL, 2008, 57 (11): : 582 - 587
12345