EVALUATION METHOD OF SHEAR CAPACITY OF RC REGION IN HYBRID BEAMS WHERE STEEL IS EMBEDDED IN RC REGION AT BEAM ENDS

被引：0
|
作者：
Singh R. [1 ]
Sato Y. [1 ]
Sasaki H. [2 ]
Kono S. [3 ]
机构：
[1] Technology Development Division, Fujita Corporation
[2] Central Research Laboratory, Daiwa House Industry Company Limited
[3] Institute of Innovative Research, Tokyo Institute of Technology
来源：
Journal of Structural and Construction Engineering | 2024年 / 89卷 / 821期
关键词：
Arch mechanism; Force transfer model; Hybrid beam; RC Column; Shear capacity; Truss mechanism;
D O I：
10.3130/aijs.89.798
中图分类号：
学科分类号：
摘要：
In recent years with the fabrication cost of steel soaring, there is a concerted effort to reduce the cost in order to construct large span buildings such as logistic terminals, shopping malls and medical facilities. Research investigations are being carried out and one of the methods is using a composite structure with reinforced concrete columns and hybrid beams. Since a greater shear force is transferred to the RC region, a precise method to estimate the shear capacity is necessary. Therefore, in this study hybrid beams under shear failure were examined and a method to the evaluate shear capacity is proposed. © 2024 Architectural Institute of Japan. All rights reserved.
引用
收藏
页码：798 / 806
页数：8
相关论文
共 50 条
  • [31] Database evaluation and reliability calibration for flexural strength of hybrid FRP/steel-RC Beams
    Tarawneh, Ahmad
    Alajarmeh, Omar
    Alawadi, Roaa
    Amirah, Hadeel
    Alramadeen, Razan
    COMPOSITE STRUCTURES, 2024, 329
  • [32] Study on design formula of shear capacity of RC beams reinforced by CFRP grid with PCM shotcrete method
    Guo, Rui
    Pan, Yi
    Cai, Lianheng
    Hino, Shinichi
    ENGINEERING STRUCTURES, 2018, 166 : 427 - 440
  • [33] Prediction of shear capacity of RC beams strengthened with FRCM composite using hybrid ANN-PSO model
    Nguyen, Trong-Ha
    Tran, Ngoc-Long
    Phan, Van -Tien
    Nguyen, Duy-Duan
    CASE STUDIES IN CONSTRUCTION MATERIALS, 2023, 18
  • [34] Analytical study on the shear performance of beam-column connections in hybrid structures with RC columns and S beams
    Yonezawa, Kenji
    Noguchi, Hiroshi
    Transactions of the Japan Concrete Institute, 1994, 16 : 257 - 264
  • [35] Shear Performance of Embedded Through Section (ETS) Over Near Surface Mounting (NSM) Method of RC Beams
    Prabhakaran, Preetha
    Joseph, Glory
    PROCEEDINGS OF STRUCTURAL ENGINEERING AND CONSTRUCTION MANAGEMENT, SECON'19, 2020, 46 : 919 - 933
  • [36] Shear behavior of RC beams strengthened with high-strength steel strand mesh reinforced ECC: Shear capacity, cracking and deformation
    Zhao, Dapeng
    Li, Ke
    Fan, Jiajun
    Wang, Yu
    Zhu, Juntao
    ENGINEERING STRUCTURES, 2024, 298
  • [37] EVALUATION OF BEHAVIOR OF HYBRID BEAM COMBINING STEEL INVERTED T-SECTION AND RC FLANGE
    Badache, Hacene
    Mezhoud, Samy
    Melhem, Abdul Qader
    CIVIL AND ENVIRONMENTAL ENGINEERING REPORTS, 2022, 32 (03) : 166 - 181
  • [38] Shear capacity prediction for FRCM-strengthened RC beams using Hybrid ReLU-Activated BPNN model
    Tipu, Rupesh Kumar
    Batra, Vandna
    Suman, K. S.
    Pandya, K. S.
    Panchal, V. R.
    STRUCTURES, 2023, 58
  • [39] Embedded Through-Section FRP Rod Method for Shear Strengthening of RC Beams: Performance and Comparison with Existing Techniques
    Chaallal, O.
    Mofidi, A.
    Benmokrane, B.
    Neale, K.
    JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2011, 15 (03) : 374 - 383
  • [40] Experimental Tests and Design Model for RC Beams Strengthened in Shear Using the Embedded Through-Section FRP Method
    Mofidi, Amir
    Chaallal, Omar
    Benmokrane, Brahim
    Neale, Kenneth
    JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2012, 16 (05) : 540 - 550
12345